气象传真机操作规程.doc

气象传真机的操作规程 TYPE：JRC/JAX-9A一．接收频率的设定。For example, a frequency of 7305 kHz of the JMH can be set as follows:例如, JMH 台的7305 kHz 的频率可以按下列方法设定:1.? ?? ???Press??POWER??switch on the rear.将传真机背面上的??POWER??开关打到??ON??的位置。2.? ?? ???Press??CLR??button..按??CLR??按钮。3.? ?? ???Press??7??3??0??5??0??key.按数字键??7??3??0??5??0 。二．接收频率的登记。(1)??Registering reception frequencies for automatic frequency selection (Ex. 1)This example registers JMH frequencies to channel group 00.? ? 为自动频率选择而登记接收频率（例1）。该例将JMH 的频率登记到00 组。1.? ?? ?Press??POWER??switch on the rear.将传真机背面上的 POWER 开关打到??ON??的位置。2.? ?? ?Press??CLR??button.按??CLR??按钮。3.? ?? ?Press??0??-??9??numeric keys to enter a frequency of 3622.5kHz.按数字键??0??-??9??来输入频率 3622.5 kHz。4.? ?? ?Press??ENT??button.按??ENT??按钮。5.? ?? ?Press??0??-??9??numeric keys to enter a frequency of 7305.0kHz.按数字键??0??-??9??来输入频率 7305.0 kHz.6.? ?? ?Press??ENT??button.按??ENT??按钮。7.? ?? ?Repeat the above steps 3 to 6 to register the remaining frequencies.重复上述 3 到 6 的步骤来登记剩下的频率。8.? ?? ?Press??ENT??ENT??ENT??button to leave channel 07 08 09 unregistered.按??ENT??ENT??ENT??按钮使 07 08 09 频道不登记。（2） Registering reception frequencies for automatic frequency selection (Ex.2)This example register JMH frequencies to channel group 30.为自动频率选择而登记接收频率（例2）。该例将JMH 的频率到30 组。1．? ? Press??POWER??switch on the rear.将传真机背面上的 POWER??开关打到??ON??的位置。2．? ? Press??CLR??button. To clear the data on the LCD.按 CLR 按钮来清除液晶屏上的数据。3．? ? Press??numeric keys??0??-??9??to enter a frequency of 3622.5kHz.按数字键??0??-??9??来输入频率 3622.5kHz。4．? ? Press??CH??button??to set the channel set mode.按 CH??按钮来设置频道方式。5．? ? Press numeric keys??3??and??1??in this order to enter the channel number 31.按数字键??3??和??1??来输入频道号码31。6．? ? Press??ENT??button to register the entered frequency to channel 31.按 ENT??按钮把输入的频率登记到 31 频道。7．? ? Press numeric key??0??-??9??to enter a frequency of 7305.0kHz.按数字键??0??-??9??来登记频率7305.0kHz。8．? ? Press??ENT??button to register the entered frequency to