-某立井开采煤矿固定机械及运输设备选型计算1.doc

毕业设计说明书 题目： 某立井开采煤矿固定机械及运输设备选型计算　 整设计图纸请联系本人，参见豆丁备注。/lzj781219 毕业生姓名 ： 专业 ： 矿山机电 学号 ： 指导教师 所属系（部） ： 机电系  前 言 本次毕业设计可能是我学生生涯最后的一次学习机会，在此首先感谢学院和指导老师对我设计的支持和帮助，为我以后的工作打下了一个有益的基础。本设计针对，内容涉及较多，设计时间较长，是一个设计的过程，更是一个学习的过程。通过前面的实地实习，在老师的努力下收集到了较为齐全和准确的相关资料，其中包括了，为本次设计打下了一个良好的基础。同时涉及的参考文献较多，多数为十几年前的老版本，难免存在一些错误，还望大家见谅。根据设计大纲所要求内容，将设计分为章，内容主要有三部分，第一部分主要是对内容涉及第一章。二到章为设计的第二部分，也是本次设计的核心内容，主要是对，选择合理的最后一部分是，内容涉及第整个设计内容可靠、数据可信。存在问题，批评指正。 This graduation project is take the coal mine double vertical shaft fixed mechanical device shaping as the design object, but mainly is one yearly produces 1,200,000 tons mine pits to design set of economies the necessary fixed machinery and the transport vehicle, this ore may mine coal the level is 9 coals, the coal bed inclination angle for 2°to 4°, may pick thickness is 3.3 meters, uses double vertical shaft development way mining, mine pit draining water is highly 280 meters, wells up the water volume is normally 130m3/h, wells up the water volume is most greatly 250 m3/h, wells up the time is most greatly 65 days, the mine pit amount of wind is 114 m3/s, the initial period negative pressure is 3270Pa, last stage negative pressure 4130 Pa.This ore designs two panels, each panel establishes a working surface. This graduation project mainly by bottom of the well transport vehicle shaping design (including: The coal mining machine shaping, the scraper conveyer shaping, the extension carrier vehicle shaping, the leather belt conveyer shaping, the mineral product electric locomotive and the mine car choice and the number of vehicles indeed grade), the lift technique shaping design (including: Main well promotion system shaping, vice-well promotion system shaping and so on) and fluid machinery equipment shaping design (including: Central water plant arrangement and draining water plan determination, water pump shaping and pump Taiwan number determination; Ventilates the engine room the arrangement and the ventilator shaping and the