Altium中英文错误对照表.docx

一、Error Reporting 错误报告A：Violations Associated with Buses 有关总线电气错误的各类型（共12项）bus indices out of range 总线分支索引超出范围Bus range syntax errors 总线范围的语法错误Illegal bus range values 非法的总线范围值Illegal bus definitions 定义的总线非法Mismatched bus label ordering 总线分支网络标号错误排序Mismatched bus/wire object on wire/bus 总线/导线错误的连接导线/总线Mismatched bus widths 总线宽度错误Mismatched bus section index ordering 总线范围值表达错误Mismatched electrical types on bus 总线上错误的电气类型Mismatched generics on bus (first index) 总线范围值的首位错误Mismatched generics on bus (second index) 总线范围值末位错误Mixed generics and numeric bus labeling 总线命名规则错误B：Violations Associated Components 有关元件符号电气错误（共20项）Component Implementations with duplicate pins usage 元件管脚在原理图中重复被使用Component Implementations with invalid pin mappings 元件管脚在应用中和PCB封装中的焊盘不符Component Implementations with missing pins in sequence 元件管脚的序号出现序号丢失Component contaning duplicate sub-parts 元件中出现了重复的子部分Component with duplicate Implementations 元件被重复使用Component with duplicate pins 元件中有重复的管脚Duplicate component models 一个元件被定义多种重复模型Duplicate part designators 元件中出现标示号重复的部分Errors in component model parameters 元件模型中出现错误的的参数Extra pin found in component display mode 多余的管脚在元件上显示Mismatched hidden pin component 元件隐藏管脚的连接不匹配Mismatched pin visibility 管脚的可视性不匹配Missing component model parameters 元件模型参数丢失Missing component models 元件模型丢失Missing component models in model files 元件模型不能在模型文件中找到Missing pin found in component display mode 不见的管脚在元件上显示Models found in different model locations 元件模型在未知的路径中找到Sheet symbol with duplicate entries 方框电路图中出现重复的端口Un-designated parts requiring annotation 未标记的部分需要自动标号Unused sub-part in component 元件中某个部分未使用C：violations associated with document 相关的文档电气错误（共10项）conflicting constraints 约束不一致的duplicate sheet symbol name 层次原理图中使用了重复的方框电路图duplicate sheet numbers 重复的原理图图纸序号missing child sheet for sheet symbol 方框图没有对应的子电路图missing configuration target 缺少配置对象missing sub-project sheet for component 元件丢失子项目multiple configuration targets 无效的配置对象multiple top-level document 无效的顶层文件port not linked to pare