英文版PDS操作教程-CHAP4.doc

Component Placement Tuesday: Lecture 12:30 - 2:00 Lab 2:00 - 4:00 In this section you will learn how to place components by the fitting-to-fitting method. Topics Place Component manually places components (such as valves or fittings), piping, instruments, or assemblies. Select Placement from the Piping pull-down menu. Connect to Design connects to either a component, nozzle, or piping segment for placing components in the active model. Select the Place Component option from the Placement palette activated by the Piping pull-down menu. Point in Space places the orientation tee at a point in space for placement of components. Select the Place Component option from the Placement palette activated by the Piping pull-down menu. Place Pipe places pipe from one component to another or places pipe at a fixed length. Select the Place Component option from the Placement palette activated by the Piping pull-down menu. Active Options changes the active options for placement of components and pipe. Select the File pull-down menu. Lab Exercises Place Component Exercise Note: See Place Component for reference information. Select Place Component from the Placement palette activated from the Piping pull-down menu. Select Connect to Design. Identify nozzle A. Select the active segment data area. Change the attributes that you want. Toggle the Active Flow Direction to Active Point is Upstream. Accept with Confirm to confirm the new parameters. Select DEFAULT flange, then Confirm. Select First Size and key in 4 (100). Select Concentric reducer, then Confirm. Select DEFAULT flange, then Confirm. Select Check valve, then Confirm. Select DEFAULT flange, then Confirm. Select Place Pipe and key in 2 (610mm). System automatically places pipe, without an accept from you. Select DEFAULT flange, then Confirm. Change secondary axis direction, select West from the compass. Select Gate valve, then Confirm. Select DEFAU