02-A 遵循标准.doc

目 录 A 遵循标准 A-1 A.1 ITU-T相关标准 A-1 A.2 IEEE相关标准 A-3 A.3 IETF相关标准 A-3 A.4 环境相关标准 A-3 A.5 国家相关标准 A-5 A.6 EMC相关标准 A-6 遵循标准 本章列出了OptiX OSN 9500遵循的各种标准。 ITU-T相关标准 ITU-T相关标准 说明 G.691 Optical interfaces for single-channel STM-64 system and other SDH systems with optical amplifiers G.692 Optical interfaces for multichannel systems with optical amplifiers G.694.1 Spectral grids for WDM applications: DWDM frequency grid G.694.2 Spectral grids for WDM applications: CWDM wavelength grid G.702 Digital hierarchy bit rates G.703 Physical/electrical characteristics of hierarchical digital interfaces G.704 Synchronous frame structures used at 1544, 6312, 2048, 8448 and 44736 kbit/s hierarchical levels G.707 Network node interface for the synchronous digital hierarchy (SDH) G.775 Loss of signal (LOS) and alarm indication signal (AIS) defect detection and clearance criteria G.773 Protocol suites for Q-interfaces for management of transmission systems G.774 1 G.774 2 G.774 3 G.774 4 G.774 5 Synchronous Digital Hierarchy (SDH) management information model for the network element view G.781 Synchronization layer functions G.783 Characteristics of Synchronous Digital Hierarchy (SDH) equipment functional blocks G.784 Synchronous Digital Hierarchy (SDH) management G.803 Architectures of transport networks based on the Synchronous Digital Hierarchy (SDH) G.806 Characteristics of transport equipment - Description methodology and generic functionality G.813 Timing characteristics of SDH equipment slave clocks (SEC) G.823 The control of jitter and wander within digital networks which are based on the 2048kbit/s hierarchy G.824 The control of jitter and wander within digital networks which are based on the 1544kbit/s hierarchy G.825 The control of jitter and wander within digital networks which are based on the Synchronous Digital Hierarchy (SDH) G.826 Error performance parameters and objectives for international, constant bit rate digital paths at or above the primary rate