500L搪玻璃反应釜设计说明书.doc

学号： 常 州 大 学 毕业设计（论文） （2011届） 题 目 500L开式搪玻璃反应釜的设计 学 生 周峰 学 院 机械工程学院 专业班级 装备071 校内指导教师 陆亚伟 专业技术职务 高级工程师 校外指导老师 专业技术职务 二○解搪玻璃设备的作用，工作原理，工作特性及其结构组成，CAD 图、一张手工总 图和一份设计说明书等。 关键字： 搪玻璃；反应釜；夹套；结构设计；强度计算 The design of 500L glass-lined open reactor Abstract: This paper introduces the design of 500L glass-lined open reactor. Glass-lined reactor is to line the high-silica glass to the inner surface of the steel container and finally adhesion to the metal surface firmly to be the composite material products after burning at a high temperature. Therefore, glass-lined reactor has the stability of the glass and the intensity of the metal and is good corrosion-resistant equipment in the chemical Engineering. In order to understand the role, working principle, working characteristics and structural composition of the glass-lined equipment, this paper mainly makes the structural design and intensity calculation of the glass-lined reactor, to select and use the components of the equipment (such as motor, reducer, frame, seals, mixers, flange, ear blocks, clamp, cutting valve, etc.) according to the selected type of glass-lined reactor , including: choice of materials, determination of the specific size and specific location, thickness calculation of the cylinder, head, jacket and the reinforcement of the hole and so on and at last the manufacturing, inspection and acceptance of the container. Final design includes three CAD maps, a general plan manual and a design instructions. Keywords: glass-lined reactor; jacket; structural design; intensity calculation 目 录 摘要.............................................................................................................................................I 1.绪论 1 1.1课题研究的意义，国内外研究现状和发展趋势 1 1.1.1课题研究意义 1 1.1.2国内搪玻璃设备发展现状 1 1.1.3国外搪玻璃设备发展现状 1 1.1.4我国搪玻璃设备发展趋势 1 设计条件及方案 2 2.1设计条件