PE-800×1060英文说明书.doc

CONTENTS APPLICATION SPECIFICATIONS AND PERFORMANCE CONSTRUCTION AND ASSEMBLY INSTALLATION, COMMISSION AND TRAIL RUN OPERATION AND MAINTENANCE SAFETY RULES LIST OF CONSUMABLES NOTICES FOUNDATION DRAWING  Preface Thank you for choosing the faith card Brand products, in order to ensure its properly working and fully play. Before you use the machine, please read this manual carefully, and in strict accordance with the provisions of manual operation. Ⅰ.APPLICATION The machine structure is simple, reliable, easy to use and maintenance.This jaw crusher is used for crushing ores or rocks whose compressive strength does not exceed 250Mpa in various industries, such as mining, building materials, silicate, chemical engineering, etc. Ⅱ.SPECIFICATIONS PERFORMANCE 1. Size of feed opening (W×L) 800×1060 mm 2. Size of discharge opening 100-120 mm 3. Maximum feed size 630 mm 4. Speed of main shaft 250 r/min 5. Producing capacity* 85-180 m3 / h 6. Electric motor Type Y315L2-8 Power 110 k w Speed 750 r / min 7. Overall dimensions (L×W×H) 2720x2550x2805 mm 8. Weight of the crusher 30100 kg (excluding electric motor) The indicated crushing capacity is based on crushing the medium hardness dry rocks, and its specific weight is 1.6 metric ton per cubic meter. Ⅲ.CONSTRUCTION AND ASSEMBLY This crusher mainly consists of (1)frame, (2)Fixed jaw plate, (3)Left and right Side fender, (4) mobile movable jaw, (5)movable jaw, (6)eccentric shaft, (7) Bracket, (8)adjusting set, (9) Jack screw etc.(See Fig.1) The electric motor drives the eccentric shaft through V-belts and grooved pulley, and enables the swing jaw to do reciprocating movements so as to crush the materials inside the crushing chamber; and then the crushed materials are discharged from the outlet of the crushing chamber. It