FlyCap2软件使用说明.docx

摘自FlyCapture2 Software Development Kit 中的FlyCap Demo ProgramFlyCap Demo ProgramThe FlyCap application is a streaming image viewer you can use to test many of the capabilities of your compatible Point Grey camera. It allows you to view a live video stream from the camera, as well as save individual images, adjust the various video formats, frame rates, properties and settings of the camera, and access camera registers.??The full FlyCap?C++/C# source code is included with the FlyCapture SDK. To access the FlyCap workspace from the Start menu, select Program Files FlyCapture2 SDK Examples.Starting FlyCapTo run FlyCap from the Start menu, select Program Files FlyCapture2 SDK FlyCap2. The Camera Selection Dialog opens. FlyCap2 consists of two primary interfaces: the Main Window and the Camera Control Dialog.InterfaceFunctionsMain WindowView a live video stream from the camera. Save individual images. View information about the images being received, such as resolution and timestamps. Camera Control DialogSet standard pixel formats, resolutions, and frame rates. Adjust image acquisition settings such as brightness, gain, shutter and others. View information about the current camera, firmware and software environment. Adjust the white balance and color processing algorithm. Adjust advanced pixel format settings and configure high dynamic range mode. Set custom image modes. Configure internal and external input triggers and output strobe signals. Configure lookup tables of gamma functions. Use the on-camera frame buffer and data storage spaces (if supported) to re-transmit images and store flash data. Read and write to the camera registers.? View the physical registers and network topology. Camera Selection DialogWhen FlyCap starts, the Camera Selection dialog appears. This dialog allows you to view a list of all the currently connected Point Grey cameras, across all buses, and select one to control and view images from. It provides basic information for each camera, such