组合专机-92Q型气缸盖双端面铣削组合铣床总体设计.pdf

下载后可在附件框中得到全套Word文档及CAD格式图纸 492Q型气缸盖双端面铣削 组合铣床总体设计 摘 要 组合机床是以系列化、标准化的通用部件为基础，配以少量专用部件组成的专用 机床。它适宜于在大批、大量生产中对一种或几种类似零件的一道或几道工序进行加 工。组合机床可以对工件进行多面、多主轴加工，一般是半自动的。 本设计就是组合铣床的设计。其主要用在生产线上加工汽车的气缸盖的两端面。 适合大批量的生产。 本设计中采用液压传动控制,在结构上要巧妙完成动作协调。用液压系统来提供 动力,进而减少工作量,提高效率,也能减少人员损伤。 ！！！所有下载了本文的注意：本论文附有 CAD图纸和完整版 word版说明书，凡下载了本文的读者 请留下你的联系方式（QQ邮箱），或加 QQ最后，希望此文能够帮到你！ 关键词： 组合铣床 气缸盖 液压系统 第 1 页 下载后可在附件框中得到全套Word文档及CAD格式图纸 Abstract Combine the tool machine is an in general use parts that turn, standardizes with the series for the foundation, going together with with the appropriation tool machine that a little amount appropriation parts constitute.It is feat in in large quantity, mass production to a kind of or several category an or a few work preface of the spare parts carries on process.Combine the tool machine can carry on to the work piece to face much, many principal axises process, is a half generally automatic. This design is a design to combine the machine bed. Its use primarily in the production on-line process the both ends of the automotive cylinder cover. In keeping with the production that large quantity measures. The origin designs the medium adoption liquid to press to spread to move the control, wanting that the handiness completes the action on the structure coordination.Presses the system to provide the motive with the liquid, then reduce the workload, lift high-efficiency, also can reduce the personnel to hurt. Key words: Combination machine bed The cylinder covers The system of hydraulic pressure