作业编序技术MOST教学PPT.pptx

MOSTMaynard Operation Sequence Technique作业编序技术2008.04Applications of the MOST SystemMOST 系统应用 Best Method最佳方法Fair Method Time合理工作时间Capacity Management 产量管理MOST SystemMOST 系统Process Costing 过程成本评估Time Balance 时间均衡 Loss Time Control 损失时间控制Improve Workplace Layout 改进工厂布局Cell Line Design 单元生产线设计Work Station Cycle Time 工作站周期时间Standardized Cycle Time 标准周期时间Applications of the MOST System—Example 1MOST 系统应用例1Applications of the MOST System—Example2MOST 系统应用例2Process And Workstation Cycle Time过程和工序的循环时间Applications of the MOST System—Example3MOST 系统应用例3Data Power Processing Leverage 数据处理优势(Classifying data for industrial applications 把数据分类以备工业用途)Three Sequences for All Manual Work in MOST MOST 中所有人力工作的三种编序General Move Sequence -- GMS 普通移动编序Controlled Move Sequence -- CMS 受控移动编序Tool Use Sequence -- TUS 工具使用编序 ? 2005 Nokia V1-Filename.ppt / yyyy-mm-dd / InitialsGeneral Move Sequence 普通移动编序这个编序形容 取/放/归还。A Return To Original Position 回到原处A B GGain Control 掌握控制A B PPlace放置A = Action Distance 动作距离B = Body Motion 肢体动作G = Gain Control 掌握控制P = Place Motion 放置动作 MOST Index Value for General Move SequenceMOST普通移动编序指数Basic MOST Analysis—General Move SequenceMOST 基本分析—普通移动编序 走3 或4步到地上的标志处，弯下身把标志拾起后起身，走3或4步把标志放在板上A6B6G1 A6B0P1 A0 Sum of indices指数总值 = 20 TMU 时间测量单位 = 20 X 10 = 200 Time Measurement Unit—TMU时间测量单位 TMU1 TMU = 0.00001小时 = 0.0006 min = 0.036 secExercise 1 练习1 从坐着的位置开始，拿起重篮子把它放在8步之外的另一个工作台。A B G A B P A = TMU = secThe Controlled Move Sequence 受控移动编序形容物件在受控范围内移动。A B GGain Control掌握控制M X IMove Control移动控制A Return归还A = Action Distance 动作距离B = Body Motion 肢体动作G = Gain Control 掌握控制P = Place Motion 放置动作M = Move Control 移动控制X = Process Time 过程持续时间I = Align 对准 MOST Index Value for Controlled Move Sequence 受控移动指数Basic MOST Analysis—Controlled Move SequenceMOST 基本分析—受控移动编序冲床操作员走两步，同时按下两个按钮。冲床的冲程在3秒中完成。A3B0G1 M1X10I0 A0 Sum of indices指数总值 = 15 TMU 时间测量单位 = 15 X 10 = 150 Time Measurement Unit—TMU时间测量单位 TMU1 TMU = 0.00001小时 = 0.0006 min = 0.036 secTool Use S