冲压成形与板材冲压 英文资料.doc

Characteristics and Sheet Metal Forming dn3-ow ? 1.The article overview #pYt
CW ? Stamping is a kind of plastic forming process in which a part is produced by means of the plastic forming the material under the action of a die. Stamping is usually carried out under cold state, so it is also called stamping. Heat stamping is used only when the blank thickness is greater than 8-100mm. The blank material for stamping is usually in the form of sheet or strip, and therefore it is also called sheet metal forming. Some non-metal sheets (such as plywood, mica sheet, asbestos, leather)can also be formed by stamping. 65i%{([ Stamping is widely used in various fields of the metalworking industry, and it plays a crucial role in the industries for manufacturing automobiles, instruments, military parts and household electrical appliances, etc. ZL;Ztq? The process, equipment and die are the three foundational problems that needed to be studied in stamping. 7pEbH/} The characteristics of the sheet metal forming are as follows: iF, (5xp (1)? ? High material utilization A{(~f+h*g (2)? ? Capacity to produce thin-walled parts of complex shape. w}`Cv#h (3)? ? Good interchangeability between stamping parts due to precision in shape and dimension. N3m # ^S (4)? ? Parts with lightweight, high-strength and fine rigidity can be obtained. =E- ~@4q (5)? ? High productivity, easy to operate and to realize mechanization and automatization. J5nmX,` The manufacture of the stamping die is costly, and therefore it only fits to mass production. For the manufacture of products in small batch and rich variety, the simple stamping die and the new equipment such as a stamping machining center, are usually adopted to meet the market demands. pAdB@0s The materials for sheet metal stamping include mild steel, copper, aluminum, magnesium alloy and high-plasticity alloy-steel, etc. !xN_ql !(4 ? Stamping equipment includes plate shear punching press. The former shears plate int