- 1、本文档被系统程序自动判定探测到侵权嫌疑,本站暂时做下架处理。
- 2、如果您确认为侵权,可联系本站左侧在线QQ客服请求删除。我们会保证在24小时内做出处理,应急电话:400-050-0827。
- 3、此文档由网友上传,因疑似侵权的原因,本站不提供该文档下载,只提供部分内容试读。如果您是出版社/作者,看到后可认领文档,您也可以联系本站进行批量认领。
查看更多
NAS6000最初配置过程
NAS6040 划分操作系统盘、安装操作系统过程
DS5000 划盘,认盘后
* help
? environment led_off scsi
aggr fcadmin led_on sesdiag
disk fcdiag outb storage
disk_list fcstat raid_config sysconfig
disk_mung fctest sasadmin version
diskcopy halt sasstat vol
disktest help sata xortest
* halt
Phoenix TrustedCore(tm) Server
Copyright 1985-2006 Phoenix Technologies Ltd.
All Rights Reserved
BIOS version: 4.2.0
Portions Copyright (c) 2007-2009 NetApp. All Rights Reserved.
CPU= Dual-Core AMD Opteron(tm) Processor 2216 X 1
Testing RAM
512MB RAM tested
4096MB RAM installed
Fixed Disk 0: STEC
Boot Loader version 1.6.1
Copyright (C) 2000-2003 Broadcom Corporation.
Portions Copyright (C) 2002-2009 NetApp
CPU Type: Dual-Core AMD Opteron(tm) Processor 2216
LOADER-B
LOADER-B reboot
Invalid command: reboot
Available commands: version, update_flash, netboot, boot_diags, boot_backup, boot_primary, boot_ontap, flash, bye, set, lsmod, autoboot, go, boot, load, ping, arp, ifconfig, show, savenv, saveenv, unsetenv, set-defaults, setenv, printenv, help
*** command status = -1
LOADER-B autoboot
Loading x86_64/kernel/primary.krn:.............0x2000000x2ab79580x39d16b0/4665549 0x3e4477d/3 Entry at 0Starting program at 0Press CTRL-C for special boot menu
Thu May 20 06:42:07 GMT [nvram.battery.state:info]: The NVRAM battery is currently ON.
Special boot options menu will be available.
Thu May 20 06:42:10 GMT [cf.nm.nicTransitionUp:info]: Interconnect link 0 is UP
Thu May 20 06:42:15 GMT [fci.adapter.nonArray:info]: Fibre Channel adapter 0a is on the list of non-Storage Array adapters.
Thu May 20 06:42:15 GMT [fci.adapter.nonA
文档评论(0)