PML命令_part1_design模块.doc

ADD to Drawlist ● ADD ALL WITHIN VOL CE $*Add all elements include and crossing the CE volume box ● ADD ALL WITHIN VOL CE 100 $* Add all disciplines that overlap CE with an additional clearance volume +100mm $* 加入当前CE的volume范围之外100的体积内的所有的元件 ● ADD ALL SCTN WITHIN VOL CE $* Add only the SCTN include and corssing the CE volume ● ADD ALL SCTN WITH PURP EQ PS $* Add only the SCTN with their Purpose EQ to’ps’ ● ADD ALL WITH PURP EQ PS $* add all不可以单独使用，但是可以这样有限制条件地使用 ● ADD ALL WITHIN VOL CE 500 COLOUR 4 $*Add all within volume CE+500 colour yellow ● ADD CE $* Can be followed by AUTO CE to zoom adjusted around CE ● ADD ALL SITE $* add all site, ADD SITE will get error ● ADD PIPE $* add the pipe of CE ● ADD ALL PIPE $* add all pipe ● ADD CREF $* Add cref of CE,confirm the cref attribute is existent,cref can be instead of tref,href. $* TEE或则NOZZLE有Cref属性，branch都有Href和Tref属性。 ● AUTOCOLOUR OFF ● REMOVE CE ● ADD CE COLOUR 39 translucency 25 EDGES ON $* or ADD CE COLOUR BLUE translucency 25 EDGES ON ● AUTOCOLOUR $* add CE and set the colour 39,with 25% of translucency,edges on. $* 如果是对于某个具体的元件操作，实际上是作用于其紧邻的管理层。 $* 只有在translucency被设置的情况下才能设置EDGES ON REMOVE ● REM CE $* Remove Current element ● REM ALL $* Remove all element ● REM EQUI $* Remove equipment of CE ● REM ALL EQUI $* Remove all equipment ● REM ALL WITHIN VOL CE 100 $* rem all in the volume of ce adding 100 ● REM ALL WITHIN VOL CE $* rem all in the volume of ce,CE can be instead by name of a element. MARK 同一个可以被标记的元件只能被标记一次，自动切换到最后一次标记的效果。 ● MARK CE $* Mark CE name ● UNMARK CE $* or UNMARK ALL ● MARK WITH TEMPORARY CE $* Tag CE with temporary name TEMPORARY ● MARK With (NAME OF CATREF) /NAME $* mark /NAME with name of catref of /NAME ● MARK With (TYPE) /NAME $* tag /NAME with type of /NAME ● MARK With (STRING(DESPARAM[1]) + _ + NAME OF CATREF) CE $*mark CE with elem