德国紧固件标准目录.doc

标准代号 标准名称（英文） 标准名称（中文） 取 消 DIN ISO标准 DIN标准 DIN Handbook 10 螺栓、螺钉和螺柱 DIN 267-30: February 2001 Technical delivery conditions for fasteners Part 30:Metric thread rolling screws of property class 10.9 紧固件交货技术条件，第30部分：米制滚压螺纹螺钉，强度等级10.9 DIN 478: February 1985 Square head bolts with collar 方头带肩螺钉 DIN 479: February 1985 Square head bolts with short dog point 方头短圆柱端螺栓 DIN 480: February 1985 Square head bolts with collar and oval half dog point 方头带肩和凸圆形末端螺钉 DIN 561: February 1995 Hexagon set screws with small hexagon and full dog point 六角头长圆柱端紧定螺钉 DIN 564: February 1995 Hexagon set screws with small hexagon,half dog point and flat cone point 六角头短圆截锥端紧定螺钉 DIN 603*): October 1981 Mushroom head square neck bolts 方颈平圆头螺栓 DIN 604*): October 1981 Flat countersunk nib bolts 带榫的沉头螺钉 DIN 605*): October 1981 Flat countersunk square neck bolts with long square 高方颈沉头螺钉 DIN 607*): October 1981 Cup head nib bolts 带榫的半圆头螺栓 DIN 608*): October 1981 Flat countersunk square neck bolts with short square 短方颈沉头螺栓 DIN 609: February 1995 Hexagon fit bolts 六角头配合螺钉 DIN 835: February 1995 Studs with a length of engagement equal to about 2 d 双头螺栓.旋入端≈２ｄ DIN 931-2: September 1987 M42 to M160×6 hexagon head bolts Product grade B 带柄六角螺钉.螺纹M42 至M160×6.产品等级B DIN 938: February 1995 Studs with a length of engagement equal to about 1 d 双头螺钉.旋入端≈1d DIN 939: February 1995 Studs with a length of engagement equal to about 1,25 d 双头螺钉.旋入端≈1.25d DIN 940: February 1995 Studs with a length of engagement equal to about 2,5 d 双头螺钉；旋入端≈2.5d DIN 949-1: February 1995 Metric interference-fit thread studs with a length of engagement equal to about 2 d(type A) 公制紧配合螺纹MFS的双头螺丝.第1部分:旋进长度ca2d(A型) DIN 949-2: July 1995 Metric interference-fit thread studs with a length of engagement equal to about 2,5 d(type B) 公制紧配合螺纹MFS的双头螺丝.第1部分:旋进长度ca2.5d(B型) DIN 967: January 1994 Product grade A cross recessed pan head screws with collar 带凸肩和十字槽的大柱头螺钉.产品等级A DIN 968: Januar