开关电源中英文翻译.doc

Switching Power Supply Switching power supply is a voltage conversion circuit, the main work is the step-up and step-down, are widely used in modern electronic products. Always work because the switching transistor in the on and off state, so called switching power supply. Switching power supply in real terms is an oscillator circuit, the conversion of electrical energy not only used in power circuit, the circuit in other applications are also common, such as LCD backlight circuits, such as fluorescent lamps. Switch the source compared with the transformer high efficiency, good stability, small size and other advantages, disadvantages is the relatively small power, and high-frequency interference on the circuit, circuit complexity, such as easy maintenance. Talking about switching power supply before you familiar with the feedback oscillator circuit transformer, can produce a regular pulse current or voltage of the circuit is called oscillation circuit, transformer feedback oscillator circuit is able to meet these conditions the circuit; it in the basic amplifier circuit with a feedback loop composed of C2, L1 election to form a parallel resonant frequency circuit, the instantaneous power in the circuit turn-VT, this time in the C2, L1, composed of parallel resonant circuits have a very rich harmonic, when the plus parallel resonance frequency and the natural frequency of the same circuit, the circuit to enter a state of oscillation, and VT through L3 feedback to further enlarge the base, and ultimately the formation of a regular pulse current or voltage output to the load RL. Switching power supply is around the transformer and the feedback oscillator circuit design, but the basis of the original increase in the number of protection and control circuits, analysis of our oscillation circuit can be used to analyze the method of switching power supply. Switching Power Supply vibration by way of sub-swing can be divided into self-excited and it excited the two, since