中国长征2号纸模图纸7.pdf

Assembling Instructions Chang-Zheng (LongMarch) CZ-2 F Scale 1 : 96 Translate from Justin Reinert Step 1 Cut out p art A 1 and bend it round using a table corner or other hard edge. Step 2 Glue both sides together, tof orm a cylinder. Tipp: Press the glued area together with a doll rod or kitchen p ap er roll. Step 3 Glue the strip e with cerated edges on the bottom side (blue markings above of the p attern) of the cylinder of p art A 1. The strip e should be glued, so that the p art D 18 can be glued, even with the bottom of the cylinder. App roxamently the same thickness as the cylinder walls. Step 4 Glue p art D 20 which is stabillized with a 1 mm cardboard p iece, to the upp er side (blue markings in the p attern) of p art A 1. Step 5 Parts C 2,3, A 7,D 20 andC 5,E 5b,D 21 should be assembeled the same as in steps 1 through4. Parts E 4,6, 10 and 11 should be glued together so that theyf orm a cone. Step 6 Glue the assembled groupsf rom p arts 1-3 together tof orm the rocket body. Be caref ul that the markings are correctly aligned in one line. With p arts 4- 7 and the cone 10 you will build the p ayload bay. Step 7 To begin the construction of the rocket booster, glue p art B 8 in the same way as the rocket body step 1-3.