FlexRay通信系统电气物理层一致性测试规范V2.1修订本B 勘误表1英文电子书.pdf

FlexRay Communications System Electrical Physical Layer Conformance Test Specification Version 2.1 Revision B, December 2009 FlexRay Physical Layer Conformance Test Specification Disclaimer Disclaimer This specification and the material contained in it, as released by the FlexRay Consortium, is for the purpose of information only. The FlexRay Consortium and the companies that have contributed to it shall not be liable for any use of the specification. The material contained in this specification is protected by copyright and other types of Intellectual Property Rights. The commercial exploitation of the material contained in this specification requires a license to such Intellectual Property Rights. This specification may be utilized or reproduced without any modification, in any form or by any means, for informational purposes only. For any other purpose, no part of the specification may be utilized or reproduced, in any form or by any means, without permission in writing from the publisher. The FlexRay specifications have been developed for automotive applications only. They have neither been developed nor tested for non-automotive applications. The word FlexRay and the FlexRay logo are registered trademarks. Copyright © 2006 - 2009 FlexRay Consortium. All rights reserved. The Core Partners of the FlexRay Consortium are Adam Opel GmbH, Bayerische Motoren Werke AG, Daimler AG, Freescale Halbleiter Deutschland GmbH, NXP B.V., Robert Bosch GmbH and Volkswagen AG. FlexRay Physical Layer Conformance Test Specification Table of Contents Table of Contents 1 Introduction 6 1.1 Scope 6 1.2 References 6 2 Changes in the Conformance Test Specification V2.1 R