检验程序 Inspectio Procedure中英.doc

检验控制程序 Inspection Control Procedure1 目的 purpose 本程序的主要目的是根据公司质量策划安排对产品的特性进行检验，以验证产品要求已得到满足。 The main purpose of the procedure is that acc. to company quality planning to implement insepction of product property to validate that the product requirement has been complied.2 适用范围 Application Scope 本程序文件主要是适用于公司采购、外庸さ牟牧稀氤善泛统善返冉醪返募煅椋桓鞒导渖讨胁泛凸ば虻募煅椋灰约白钪詹返募煅椤?The procedure is mainly applicable for the incoming insepction of the company purchasedmaterial and out-sourcing material semi-product and finished product the insepction of variousfactory work process and under production product the finsied product inspection3 规范性引用文件 Normative Documents 下列文件中的条款通过本标准的引用而成为本标准的条款。凡是注日期的引用文件，其随后所有的修改单（不包括勘误的内容）或修订版均不适用于本标准，然而，鼓励根据本标准达成协议的各方研究是否可使用这些文件的必威体育精装版版本。凡是不注日期的引用文件，其必威体育精装版版本适用于本标准。 The clauses in the following documents will become the clauses of the standard via the quoteof the standard. All the quoted documents with date all the future change formcorrected contentsexcluded or the revise editions are not applicable to the standard. While encourage the partieswho has had agreement acc. to standard to study whether can use the latest version of thesedocuments. All quoted documents which not notes the data the latest version is applicable tothe standard ISO9001：2008 质量管理体系要求 8.2.4产品的监视和测量 ISO9001 ： 2008 Quality Management System Requirement 8.2.4 Production Monitoring andMeasurement4 术语和定义 Terms and Definitions 本程序采用GB/T19000中确定的的专业术语。 The procedure uses the professional terms defined in GB/T19000.4.1 检验 Inspection 通过观察和判断，适当时结合测量、试验所进行的符合性评价。 Through observation and judgment combine with the conformity assessment of measurement andtest properly.4.2 首件检验 FAI 对生产的第一件产品进行的检验。 Implement insepction to the produced first product.4.3 互检 Mutual Inspection 下道工序对上道工序的检验、班组长对本班操作工自检后的产品的检验。 The next work process insepct the last work process the group leader insepct the productwhich has been self-insepcted by the operators.4.4 自检 Self-inspection 操作工在生产过程中进行的自主检验。 The operator implement self