EBS 库存管理操作实例11——组织间在途转移：检验后接收.docx

EBS 库存管理操作实例11——组织间在途转移：检验后接收按照运输方式的不同，Inter-Org Transfer可分为组织间直接转移（Direct Inter-Org Transfer）和组织间javascript:;在途转移（Intransit Inter-Org Transfer）。其中组织间在途转移的接收方式有三种：直接接收（Direct Receipt）、标准接收（Standard Receipt）和检验后接收（Inspection Required Receipt）。下面作一一介绍。4) 组织间在途转移——检验后接收第1步：设置发运网络（Shipping Network）Responsibility: Manufacturing and Distribution ManagerOrganization: M1 – Seattle Manufacturing打开路径：Inventory Setup Organizations Shipping Network在Main这个标签的行项目里找到M1到M2这一行，设置如下：Transfer Type = IntransitFOB = Shipment （如果出现警告窗口，点击OK按钮确认即可）Receipt Routing = Inspection保存后关闭该表单。第2步：组织间转移（Inter-Org Transfer）Responsibility: Manufacturing and Distribution ManagerOrganization: M1 – Seattle Manufacturing打开路径：Inventory Transactions Inter-organization TransferDate 默认To rg = M2 （系统自动转换成组织名 Boston Manufacturing）Type = Intransit ShipmentShipment Number = INT-1234567（自定义）点击按钮 Transaction Lines输入以下内容项：emRevSubinventoryLocatorTo SubinvTo LocatorQuantityLotSerialItem1Sub2dest_sub10Item2Sub2dest_sub10YItem3Sub2987.654.3210dest_subD.1.110YItem4Sub2dest_sub10YItem5ASub2987.654.3210dest_subD.1.110YY其中子库存dest_sub是在实例7——Subinventory Transfer创建的，位于M2组织下。输入完毕后保存、关闭。第3步：检查各子javascript:;库存的在手量（On-hand Quantity）Responsibility: Manufacturing and Distribution ManagerOrganization: M1 – Seattle Manufacturing打开路径：Inventory On-hand, Availability On-hand QuantitySubinventory = sub2此时sub2的在手量已由70减为60了，因为我们在上一步转移了10个到M2组织。第4步：接收（Receipt）Responsibility: Manufacturing and Distribution ManagerOrganization: M2 – Boston Manufacturing打开路径：Inventory Transactions Receiving Receipts注意：一定要切换到M2组织下。 在Shipment框里输入在第2步自定义的Shipment 号码“INT-1234567”，单击按钮Find 在每一行输入Location，直接输入M2然后按Tab键即可。最后，保存对5个Item的接收。再查看目的子库存 dest_sub下的在手量。Subinventory = dest_sub可以看出，目的子库存的在手量还只是上次操作组织间直接转移的数量20，因为这次是组织间在途运输——检验后接收，虽然做了接收，但在交付前还需要检验。下面就来检验。第5步：检验（Inspection）Responsibility: Manufacturing and Distribution ManagerOrganization: M2 – Boston Manufacturing打开路径：Inventory Transactions Receiving Receiving Transactions在Shipment框里输入在第2步自定义的Shi