轴套双面自动切端面倒角机—总体三维及运动仿真毕业设计毕业论文目录.doc

目 录 摘 要 ……………………………………………………………………………Ⅰ Abstract …………………………………………………………………………Ⅱ 1 绪论1 2 总体设计……………………………………………………………………………1 2.1 方案分析 ………………………………………………………………………2 3 工作原理……………………………………………………………………………2 4 三维设计……………………………………………………………………………3 4.1 实现软件介绍…………………………………………………………………3 4.2 三维实体造型…………………………………………………………………3 4.2.1 料仓实体三维造型…………………………………………………………3 4.2.2 振动式料盘的实体三维造型 ……………………………………………7 4.2.3 夹具机构汽缸的实体三维造型…………………………………………17 4.2.4 夹具结构的滑座实体三维造型…………………………………………24 4.2.5 夹具机构的汽缸实体三维造型…………………………………………26 4.2.6 进给加工系统的箱体实体三维造型……………………………………31 4.2.7 其他零件的三维造型……………………………………………………35 4.3 虚拟装配 ……………………………………………………………………42 4.3.1 装配综述…………………………………………………………………42 4.3.2 装配实例…………………………………………………………………42 5 运动仿真 …………………………………………………………………………45 5.1 运动仿真的创建………………………………………………………………45 6 结论 ………………………………………………………………………………48 致谢 …………………………………………………………………………………49 参考文献 ……………………………………………………………………………50 文献综述 ……………………………………………………………………………51 摘 要 随着经济和技术的发展，企业对轴套加工的效率也越来越高。于此，本组设计了一个轴套双面自动切端面倒角的专用机床，车两端面和倒角只需要5秒钟。本文用SolidWorks软件对轴套双面自动切端面倒角机床进行三维造型和运动仿真，模拟轴套加工的真实环境。运动结果与真实环境中轴套的加工一致，具有一定的参考性。 关键词：专用机床；三维造型；运动仿真 Abstract With the development of economy and technology, enterprise of shaft processing efficiency is also more and more high. In this design, the machine automatically cut end surface chamfer an axle sleeve double-side, only need 5 seconds two face and chamfer. In this paper, using SolidWorks software for axle sleeve double-side automatic cut end chamfering machine for 3D modeling and motion simulation, simulation of the real environment of shaft processing. Consistent results with the shaft sleeve machining motion in real environment, has a certain reference. Key words: Special machine tool; modeling; simulation 重庆理工大学毕业论文 轴套双面自动切端面倒角机—总体三维及运动仿真 I 1