ConfiguringandVerifyingRouteRedistribution文件材料.pptVIP

Cisco Network Academy. All rights reserved.. CCNP+ BSCI v3.0 Cisco Network Academy. All rights reserved.. CCNP+ BSCI v3.0 Manipulating Routing Updates Configuring and Verifying Route Redistribution Redistribution Supports All Protocols RtrA(config)#router rip RtrA(config-router)#redistribute ? bgp Border Gateway Protocol (BGP) connected Connected eigrp Enhanced Interior Gateway Routing Protocol (EIGRP) isis ISO IS-IS iso-igrp IGRP for OSI networks metric Metric for redistributed routes mobile Mobile routes odr On Demand stub Routes ospf Open Shortest Path First (OSPF) rip Routing Information Protocol (RIP) route-map Route map reference static Static routes cr Redistributing into OSPF Configuring Redistribution into EIGRP RtrA(config)# router eigrp 100RtrA(config-router)# redistribute ospf ? 1-65535 Process ID RtrA(config-router)# redistribute ospf 1 ? match Redistribution of OSPF routes metric Metric for redistributed routes route-map Route map reference … cr Default metric is infinity. Bandwidth in kilobytes = 10000 Delay in tens of microseconds = 100 Reliability = 255 (maximum) Load = 1 (minimum) MTU = 1500 bytes Redistributing into EIGRP Configuring Redistribution into IS-IS RtrA(config)# router isisRtrA(config-router)# redistribute eigrp 100 ? level-1 IS-IS level-1 routes only level-1-2 IS-IS level-1 and level-2 routes level-2 IS-IS level-2 routes only metric Metric for redistributed routes metric-type OSPF/IS-IS exterior metric type for redistributed routes route-map Route map refer