[信息与通信]nokia3G基站调侧.ppt

Nokia WCDMA BTS Commissioning History Connecting locally To connect to the BTS locally: Install the Nokia WCDMA Local Launcher application to your computer. Connect your PC to any of the BTS WAM units or to the AXC LMP with a communication cable (10baseT Ethernet cable with RJ-45 connector). Launch Nokia WCDMA BTS Manager under the Local Launcher menu. Connecting remotely 1/2 To connect to the BTS remotely: Install the Nokia WCDMA Local Launcher application to your computer. Launch Nokia WCDMA BTS Manager under the Local Launcher menu. The Application Launcher: Offline mode dialog box opens on the screen. Connecting remotely 2/2 Commissioning workorder Supreme view Optima Compact with IBBU view Optima Compact WREB view MetroSite view Commissioning General Settings Site Settings BTS Configuration BTS Configuration in MetroSite Local Cell Resources Local Cell Resources in MetroSite WTR Information WCDMA Carrier Information ATM Settings Intelligent Shutdown External Alarms 1/2 External Alarms 2/2 External Control Settings WIA Unit Information in MetroSite MHA Settings BTU Settings Antenna Settings RX Cabling TX Cabling Save Parameters Send Parameters BTS Testing WCDMA LOOP TEST WCDMA LOOP TEST EAC Functionality Test Commissioning Report Test models 1-4 Test Models according 3GPP specs BER TEST Define Feeder Loss, Antenna Cable Length and Velocity Factor for both Antennas. Define is Diplexer of Triplexer is in use. Define RX- Cable information Define TX Cable Information XML- file is created using all previous parameters. XML- file can be saved for later use. Send XML file to WAM. After successful sending, BTS will reset and master WAM will copy this CommissioningData.xml file to each WAM. This module is based on Nokia WCDMA BTS Commissioning Ded 16 For auto detection to work, switch all elements on. So far in this version AXC is not detected. Commissioning Wizard starts the commissioning process. Same BTS manager SW is used for Supreme, Opti