[其它]设计模板.doc

·摘要 皮带运输机是一种摩擦驱动以连续方式运输物料的机械，可以将物料在一定的输送线上，从最初的供料点到最终的卸料点间形成一种物料的输送流程。皮带运输机既可以进行碎散 物料的输送，也可以进行成件物品的输送。除进行纯粹的物料输送外，还可以与各工业企 业生产流程中的工艺过程的要求相配合，形成有节奏的流水作业运输线。关键词： 皮带运输机安装 调试 故障 ·ABSTRACT Belt conveyer is a friction drive by the continuous mode of transport machinery materials, The material can be in a conveying lin, From the initial material to the final point of discharge is formed between a material coverying process. Belt conveyer which can be broken loose material conveying, can also be carried into pieces of goods transportation. In addition to the pure material conveying, can also with various industrial enterprises and industry production processes in the process requirements are matched, formation of rhythmic flow transport line. Key Words: Belt conveyor installation, debugging, fault analysis and processing. 目　　录 摘要…………………………………………………………………….………Ⅰ ABSTRACT……………………………………………………………………Ⅱ 绪论……………………………………………………………………………..1 前言……………………………………………………………………………..2 1.胶带运输机的特点…………………………………………………................5 多种物料的运送……………………………………………………..5 运输能力范围广……………………………………………………..5 对运送线路的适应性………………………………………………..5 加料、卸料及堆料能力……………………………………………..5 工艺功能………………………………………………………….….5 可靠性及有效性……………………………………………………..6 2.胶带输送机的环保、经济型和分类………………………………………....7 环境保护方面和影响………………………………………………..7 安全………………………………………………………………….7 劳动力费用低………………………………………………………..7 动力费用低…………………………………………………………..7 维修费用低…………………………………………………………..8 长距离运输…………………………………………………………..8 带式输送机的分类…………………………………………………..8 带式输送机的工作原理…………………………………………… 11 3.胶带运输机设备参数、型号及机械部分的安装…………………………..14 3.1设备基础验收………………………………………………………..14 3.2测量放线……………………………………………………………..14 3.3基础处理……………………………………………………………..14 3.4设备搬运…………………………………………………………..…15 3.5设备安装………………………………………………………..……15 3.5.1安装顺序…………………………………………..…….15 3.5.2垫铁……………………………………………..……….15 3.5.3地脚螺栓………………………………………………….16 3.5.4机架安装……………………………………………….…17 3.5.5滚筒安装………………………………………………….18 3.5.6减速器（或CST）与低速联轴器安装……………….….19 3.5.7电机与高速联轴器安装…………………………………..19 3.5.8液力耦合器安装………………………………………….20 3.5.9抱闸安装………………………………………………....