电动车窗防夹系统的设计2.doc

摘　　要 汽车日益普及，汽车技术的发展越来越多的体现在汽车电子领域,传统的汽车电子技术仅限于对汽车中某些机械零部件进行电子控制,控制较为简单,设备比较庞大,技术较为落后;在汽车中增加电子设备的数目可以更好的控制传感器，从而增强汽车的舒适性和安全性。大部分的中等或高级汽车系统性的装备电动车窗或车门系统。这些设备中的绝大多数是全自动的，电动车窗或车门设备潜藏着卡死，挤压以及可能伤人的危险。它们必须能够反向移动以防止马达所施加的力超出正常限制。这种特性意味着必须持续监视电流和玻璃的位置。,给出了电动车窗防夹系统的物理模型,并建立了电动车窗防夹 控制系统的二阶控制模型,提出了简易的控制系统估计器;设计并实现了基于L IN总线的电动车窗防夹系统。实验 结果证明,针对相应结构的车窗,该算法具有较高的自适应性,并具备稳定性好、可行性高、成本低等特点。 [ Abstract] Car increasing popularity, car technology development more and more reflected in the car electronics field, the traditional automobile electronic technology limited to cars in some mechanical parts for electronic control, control is simple, and relatively large equipment, technology is comparatively backward; Now the computer technology, network communication technology and control technology of all kinds of car performance is optimized control. In the car increase the number of electronic equipment can better control of sensor, thus improving car comfort and safety. So most of the medium or senior motors have systemic equipment electric Windows or the door system. The vast majority of these devices is fully automatic, such electric Windows or doors equipment lurk jammed, extrusion and may hurt danger. They must be able to reverse move in order to prevent the motor force applied beyond normal limits. This characteristic means must continue to monitor the size of the current and the position of the glass. Window as auto safety is an important part of, with single-chip microcomputer and simulation technology unceasing development, USES the monolithic control to control the Windows up and down, the clip has become the trend now and put in to the application of reality. Mainly through the car window with the chip the size of the current on the test, the window size and the characteristics of the electric current of comparison, and then judge out the window in the motion state, and thus more precise control of the rise and fall of window, make control more convenient and safe. 　In view of t