15克瓶胚检测标准.ppt

Husky Injection Molding Systems CONFIDENTIAL Husky 瓶坯系统验收标准 安斌 2007年4月24日 Husky瓶坯系统验收标准 在满足设备正产运行的条件下： 粒子质量 水、电、气 生产环境（温度、湿度） 正常生产8小时 运行效率达到97% 产能不低于 15g瓶坯：47,889只/小时 25g瓶坯：27,035只/小时 瓶坯质量达到要求 Husky瓶坯质量验收标准 参见合同附件5-瓶坯质量验收标准 Husky瓶坯质量验收标准 瓶坯瓶口内径： 16g瓶坯的内径为25.10±0.10mm 15g瓶坯的内径为25.00±0.10mm 测量位置为瓶口下方1.5mm处，因瓶口内径有锥度，因此测量位置会影响测量结果。 验收过程中的问题点 15g瓶坯的瓶口内径验收标准 15g瓶口内径应根据标准在瓶口下方1.5mm处测量，测量结果在24.9-25.1mm之间为合格值。 可购买25.00mm的塞规对瓶口1.5mm处进行测量。 注意：目前个别厂用16g的塞规或吹瓶机芯轴来测量和 要求15g的瓶坯，这是不对的。请贵司统一验收检测标准。需要修改的是吹瓶机的芯轴以适应贵司新的25.00mm的标准要求。如一定要15g做到16g的内径标准则只有延长周期，损失产能，才能达到。 瓶口内径检测方法—25.00mm塞规 瓶口内径检测方法—25.00mm塞规可通过1.5mm处 工艺调整参数设置参考值—7.0秒 15g瓶坯出厂测试报告（瓶口内径值C） Husky 瓶坯系统验收标准 ? 2007 Husky Injection Molding Systems LTD. * * 16g与15g瓶坯图纸比较 16g瓶坯图纸号#3429886-0 15g瓶坯图纸号#3545448-7 25.10±0.10mm 25.00±0.10mm 25.00mm塞规可在任何量具商店购买到 上述数据是通过3坐标测量仪测出的 Presenter name and date - Arial 22pt. Title - Arial 36pt Bold. Husky Logo size and position must not be altered. Master Slide will position Titles correctly on one line. Two line titles will need to be adjusted. Two line titles position top line at same height as a one line title - 1.25”. Company name or logo is a sub-title option. Closing slide will include copyright information - Arial 12pt. Bold Title - Arial 36pt. Bold Title - Arial 36pt Bold Upper and lower case is used throughout Vertical space between the title and body text should be equal to the height of the title - 36pt Third level bullets are not recommended. Master Slide will position Titles correctly on one line. Two line titles will need to be adjusted. The first line of a two line title has to be in the same position as a one line title. Title - Arial 36pt Bold Upper and lower case is used throughout Vertical space between the title and body text should be equal to the height of the title - 36pt Third level bullets are not recommended. Master Slide will position Titles correctly on one line. Two line titles will need to be adjusted. The first line of a two line title has to be i