土木工程毕业设计（论文）-某框剪综合楼毕业设计计算书参考.doc

摘要 本毕业设计遵循先建筑、后结构、再基础的设计过程，根据任务书和指导书的要求，完成钢筋混凝土框架—剪力墙结构的华业综合办公楼的建筑、结构设计。 建筑施工图包括总平面图及说明，首层、标准层和屋顶平面图，正立面和背立面图，楼梯和电梯井的剖面图，以及若干详图。各图均按规范要求设计并得到指导老师认可。 本工程结构设计时密切结合建筑设计，力求经济合理，在框架结构体系中适当布置钢筋混凝土剪力墙，作为抗侧力构件与框架协调工作，使结构具有良好的抗震性能。结构分析的重点在于框架和剪力墙的协同工作分析。考虑毕业设计的特殊要求，以手算为主、电算为辅。 结构设计包括以下八个部分：结构刚度计算；水平地震作用效应分析；竖向荷载作用下框架和剪力墙内力计算；荷载效应组合；截面设计与配筋计算；楼梯设计；梁板设计和基础设计。 计算书的主要内容有：完成一层现浇楼板局部单元板的设计（包括手工进行荷载计算、内力分析及配筋计算，电脑绘出施工图）；根据建筑要求完成其它楼层结构布置，应用SATWE程序进行电算，并在结构布置施工图中，应用平法表示标出梁、板、柱和框架的编号、板厚及配筋；人工计算完成框架—剪力墙结构协同工作分析、结构侧移计算、剪力墙受力分析与截面设计、框架受力分析与截面设计（包括内力分析、水平荷载与竖向荷载的计算和组合、截面配筋并绘制施工图）；应用设计软件完成分析、设计，对比分析电算和手算的主要成果。 毕业设计的成果符合现行规范的要求，因而是合理可行的。 关键词： 高层建筑；钢筋混凝土结构；框架—剪力墙结构；综合办公楼；建筑与结构设计 Abstract This graduation project follows and builds, and then structure, more basic design process first, according to the request of task book and guide book, finish the building design and structural design of reinforced concrete frame - shearwall structure’s Hua-Ye comprehensive building. The construction drawing of the building including general layout and proving, first storey, standard storey and roof plane figure, straight elevation and reciting elevation, the section systems of the stair and lift well, and several detail drawings. Every drawing is designed according to the requirement of standardizing and approved by teacher. Combine the architectural design closely at the time of the structural design in this project, strive to make economy and rational, assign the reinforced concrete shearwall in the structural system of the frame appropriatly, as resist side force component work together with frame coordinate, and make the structure have good antidetonation performance. Focal point that structure analyze lie in frame and shearwall work to analyze in coordination. Consider special requirement of graduation project, rely mainly on the fact that hands can be regarded as, electricity charge for complementing. The structural design is composed of eight parts: Structural rigidity is calculated; Function effect