毕业设计（论文）-10工位回转分度部件设计精选.doc

十工位回转分度部件设计 摘要 本次毕业设计的题目是十工位回转分度部件设计。通过对十工位回转分度部件的设计，使大学生在步入社会之前，不仅能够设计出数控回转工作台，而且能够掌握机械设计的方法和步骤。本课题研究的主要内容包括：确定十工位回转分度部件的传动方案；驱动力计算及其他相关计算；零件设计与校核；零件图的绘制立；绘制装配图。 对于十工位回转分度部件设计，首先，进行总体方案设计，传动方案采用齿轮传动；然后进行各零件的设计与校核，轴采用整体式结构；轴与工作台采用螺钉连接；工作台的平衡通过止推轴承来保证；箱体由箱座、箱盖和顶盖组成，其中箱体上设计了圆台和加强筋；最后，对各零件进行装配。 数控机床的圆周进给由回转工作台完成，回转工作台可以与X、Y、Z三个坐标轴联动，从而加工出各种球、圆弧曲等。可以实现精确的自动分度，扩大了数控机床加工范围。Design of NC rotary worktable Abstract The graduation project is the subject of design of CNC rotary worktable. NC rotary table on the design, so that before the students entered the community, not only to design a CNC rotary worktable, and can master the mechanical design of the methods and procedures. The main content of this research include: determining the transmission scheme of CNC rotary worktable; driving force calculation and other calculations; part design and verification; part and three-dimensional mapping model; assembly drawing and motion simulation. NC rotary worktable for the design, first of all, the overall design, use of transmission scheme and worm gear drive; then each part of the design and verification, the whole worm and shaft structure; worm screw connection with the worktable; Balance worktable by thrust bearings to ensure; box from the box seat, lid and cover, of which the box on the design of the round table and strengthen the tendons; Finally, the parts for assembly. The circumference of CNC rotary worktable by the completion of the feed, rotary worktable with X, Y, Z three axis coordinates to be processed into a variety of balls, such as circular surface. Precision rotary worktable can realize automatic indexing, and expand the range of CNC machining. Currently, the NC rotary table CNC boring and milling machines are mainly used. With more and more widespread application of CNC technology, CNC rotary worktable applications has become a historical necessity. Keywords: NC rotary worktable; gear; worm; box; 目录 引 言 - 1 - 1 绪 论 - 2 - 1.1 本课题的学术背景及理论与实际意义 - 2 - 1.2 本课题研究的主要内