毕业设计（论文）-无尘瓷砖裁切机的结构设计精选.doc

2011届学生毕业论文（设计） 存档编号： 毕业论文（设计） 论 文 题 目： 【英 文】Clean ceramic tile cutting machine structure design 系 部：机电与建筑工程专 业：机械设计制造及其自动化 姓 名： 学 号： 指 导 老 师： 年月 日（手动瓷砖切割机不用电、无粉尘、无噪音、低损耗。在这追求，越来越多的意识到。手动瓷砖切割机，Abstract Manual ceramic tile cutting machine no electricity, no dust, no noise, low loss, high efficiency. In the pursuit of sustainable development of the secular society, more and more construction enterprises and workers to realize the inefficiency of traditional ceramic tile cutting machine, high risk, energy intensive and more dust hazard. So clean, no noise of manual ceramic tile cutter, arises at the historic moment. Gradually occupy the market. Glaze or no glaze wall brick, floor tile, solid brick, ceramic plate, vitrified porcelain brick and flat glass. Especially introduced the Italian production line produce all kinds of senior wall brick, floor tile, because according to the European Community standard production, quality of a material is especially hard, namely the use of existing electric stone cutting machine cutting is also more difficult. While manual dust-free cutting machine can quickly cut this kind of ceramic tile. More able to adapt to the continuous development of ceramic tile. Manual clean without noise cutting machine cutting principle similar to traditional diamond cut glass glass. By the design goal to design structure of main body by the guide rail, push the knife handle, base plate, guide ruler, etc. By cutting distance measurement. Manual push push the knife handle, in ceramic tile surface marking. Push the tabletting on the knife handle is then used to press line on both sides, by the middle of the floor vertices together, top down on the way. Separate ceramic tile is easily. The entire process takes only 3 to 5 seconds to complete. Compared with the traditional electric cutting machine high efficiency and clean, no noise. The c