Configuring the CPE as the PPPoE or PPPoA Client参考.ppt

Configuring the CPE as the PPPoE or PPPoA Client参考.ppt

  1. 1、本文档共44页,可阅读全部内容。
  2. 2、有哪些信誉好的足球投注网站(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。
  3. 3、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载
  4. 4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
查看更多
Configuring the CPE as the PPPoE or PPPoA Client参考

Teleworker Connectivity Configuring the CPE as the PPPoE or PPPoA Client Configuration Tasks: Configuring the CPE as the PPPoE Client over the Ethernet Interface Configure an Ethernet interface Configure a dialer interface Configure PAT Configure DHCP server Configure a static default route Example: CPE as the PPPoE Client over the Ethernet Interface Example: CPE as the PPPoE Client over the Ethernet Interface (Cont.) Configuration Tasks: Configuring the CPE as the PPPoE Client over the ATM Interface Configure an ATM interface Configure a dialer interface Configure PAT Configure DHCP server Configure a static default route Example: CPE as the PPPoE Client over the ATM Interface Example: CPE as the PPPoE Client over the ATM Interface (Cont.) PPPoE Client Configuration Configures the Ethernet interface Example: Configuring PPPoE Client Configuring the PPPoE Dialer Interface Configures the dialer interface. Configuring the PPPoE Dialer Interface (Cont.) Binds dialer interface to the dialer pool Example: Configuring the PPPoE Dialer Interface Port Address Translation Configure PAT Specifies the addresses that may be translated Example: PAT Configuration Configure a DHCP Server Enables a DHCP pool for use by hosts and enters DHCP pool configuration mode. Example: DHCP Server Configuration Configuring a Static Default Route The CPE can use a static default route to reach all remote destinations. Example: Static Default Route Verifying a PPPoE Configuration Displays PPPoE protocol messages about events that are part of normal session establishment or shutdown Verifying a PPPoE Configuration (Cont.) Displays address bindings on the Cisco IOS DHCP server Debug VPDN PPPoE Events Determine if the PPPoE connect phase is successful. Debug PPP Authentication Enable debugging for PPP authentication to verify authentication success. Verify DHCP Clients Verify how the IP address is assigned on the PC. Verify DHCP Server Verify the existing DHCP bindings on the router (DHCP server).

文档评论(0)

2017meng + 关注
实名认证
内容提供者

该用户很懒,什么也没介绍

1亿VIP精品文档

相关文档