康普综合布线方案概要.ppt

* * * * * * * * * * * * We have discussed the new significantly shorter cable and cord length requirements and how we used MDM and other technology to get there. Let’s now take a look at what these new shorter requirements mean to customers when deploying a 6A infrastructure. Here we are showing two common LAN architectures. The first is a 4 connector channel with a cross connect, a consolidation point and an information outlet in the work area. With our shorter cable and cord requirements, customers can now build 4 connector channels as short as 14m as seen here – shorter than the cable requirements were previously. In our second example we have a three connector channel like the 4 connector above but minus the consolidation point. With our shorter cable and cord requirements, customers can now build 3 connector channels as short as 9m as seen here. Each of these examples shows the new level of design freedom that customers can expect from deploying a GigaSPEED X10D solution in their LAN environment. In this third data center example we are showing a 2 connector channel in only 5 meters. This configuration will enable customers to save floor space and storage space giving them ultimate design freedom for tight data center quarters. * 1 * CTAT ，Cable Twist Accuracy Technology MDM，Modal Decomposition Modeling * (Printed Wiring Board) CFPM，Connector Field Pattern Modeling technology MDM, Modal Decomposition Modeling * CTAT ，Cable Twist Accuracy Technology MDM，Modal Decomposition Modeling * (Printed Wiring Board) CFPM，Connector Field Pattern Modeling technology MDM, Modal Decomposition Modeling * * * 美国康普提供62.5，OM2＋，OM3和OM3+ 的光缆，没有OM2光缆， * 偏振模式色散（Polarization Mode Dispersion：PMD）是潜在限制高速光纤传输速率的关键参数之一。许多光纤光学测试设备制造商提出了多种PMD测量方法，其中最常用的有干涉法、Stokes参数评估法和基于光谱分析仪（Optical Spectrum Analyzer：OSA）测量法。用OSA测量偏振模色散已被证明是可行的，并被称为固定分析仪（Fixed Analyzer：FA）法。但是该方法测量结果的可靠性有多高？需要靠测试工程师自己分析判断。 * LazrSPEED 300 ·??? Meets and exceeds the proposed next generation multimo