解码板英文说明书.doc

Aptitude Decoder of aptitude HW-2013 Instruction 2004-8 CONTENT CHAPTTER 1 Summarization CHARPTER 2 Panel introduction CHARPTER 3 Technical specifications CHARPTER 4 Connection decoder with System CHARPTER 5 Connection decoder with DVR CHARPTER 6 Connection decoder with PTZ and camera Connection diagram of decoder and PTZ (AC24V), camera Lens (DC12V): CHARPTER 7 Address setting CHARPTER 8 communication protocol, Baud rate setting CHARPTER 9 PTZ and Camera Lens auto check itself CHARPTER 10 Equipment Installation CHARPTER 11 FAQ CHARPTER 1 SUMMARIZATION The decoder of aptitude is a type of front equipment with DVR. The DVR will control the PTZ, Camera Lens, Auxiliary switch and so on through the decoder of aptitude. The decoder of aptitude can assemble all kinds of multi-protocol DVR. Without setting a protocol, it will decode code automatic quickly according to inner code of protocol then it will control the front equipments. The simple decoder of aptitude has a group of function that controls every group of power of camera, brush, lamplight and so on. The decoder of aptitude is unsuitable for the place flammable and explosive. Be careful to select the suitable working voltage for PTZ and Camera Lens when the decoder connects them. CHARPTER 2 PANEL INTRODUCTION NO Name Specification 1 CODE/POWER Communication/power indicator light 2 RS-485 The port of RS-485 communication 3 CAMERAID Decimal address coding switch (The number of camera) 4 UP/DOWN/LEFT/RIGHT Pan/tilt up/down/left/right 5 AUTO Pan/tilt auto 6 P/T-COM Pan/tilt com 7 P/T VOLTAGE Pan/tilt voltage (AC24V) 8 ZOOM/FOCUS/IRIS / 9 LNES COM / 10 DC12V/END / 11 AUX IN/OUT Wireless auxiliary switch in common 12 AC24V INPUT/ 13 POWER ON/OFF Power switch 14 AC220V 50Hz / CHARPTER 3 Technical specifications Input voltage : 24VAC?0% Pan/tilt voltage: 24VAC/1.0A Came