WINFLASH用法.doc

How to use WinFlash Utility? Dos version (Award) Step 1.Execute WinFlash.exe in the Windows(98SE, ME, 2000 or XP). This utility user interface is as below. You can choose which options you want to update.Ex. If you want to clear CMOS, to put a check with Clear CMOS this item. Step 2.Press File button, and choose Open this item If your BIOS version dont support WinFlash, it will pop-up warning message as below. Step 3.Load BIOS file you allocated. Then press Open button when you finish choosing BIOS file. Step 4.Please double check the update option you want. The Block you chose will change color from green to blue. Step 5.Press File button, and choose Update BIOS this item or press the Update BIOS now icon directly. Then load BIOS file you allocated again. Then press Open button when you finish choosing BIOS file. Step 6.Press Update button to start Update System BIOS. Step 7.When flash BIOS completed, you will see this message. Press YES to reboot your system. 　  How to use AWARD Flash Utility? Please click here for Windows version Step 1.(1) If your mainboard has a BIOS protection jumper, please change the setting to allow BIOS flashing.(2) Make a DOS boot disk. (See example: Windows 98 O.S.) Beware: Windows 2000 are not allowed to make a DOS boot diskette. a. With an available floppy disk in the floppy drive. Please leave the disk UN-write protected type. Double click the My Computer icon from Desktop, then click 3.5 diskette (A) and right click to select Format (M).  b. Select the Quick (erase) for Format Type, and pick both Display summary when finished and Copy system files, after that press Start. That will format the floppy and transfer the needed system files to it.  c. After the floppy has been formatted completely, please press Close. Step 2. Download BIOS and BIOS utility program(1) Please go to ECS website at .tw and click Download.(2) At “Download” zone, click the BIOS and “BIOS Fl