水性丝印荧光油墨色彩再现研究-包装工程.PDFVIP

第 38 卷 第 23 期 包 装 工 程 2017 年 12 月 PACKAGING ENGINEERING ·229 · 水性丝印荧光油墨色彩再现研究 王立立，张婉，黄蓓青，王卉 ，魏先福，熊晓桐，张露 （北京印刷学院，北京 102600 ） 摘要： 目的 为了更好地研究加色法成像机理，改善红色水性荧光丝印油墨的荧光性能，进而对三色荧 光油墨的呈色性能进行研究。方法 通过改变不同红色荧光材料的含量研究红色水性荧光丝印油墨的荧 光性能，接着在此基础上，得出红、绿、蓝三色荧光油墨的色域，比较不同呈色方式对三色油墨荧光性 能的影响，并探讨2 种不同的承印物对三色油墨呈色性能的影响。结果 当荧光粉质量分数为6%时，红 色水性丝印荧光油墨的荧光强度最好。三色荧光油墨的色域范围比sRGB 范围略小，可以满足色彩再现 的研究需要。丝印时，网点并列比网点叠合更有利于荧光油墨彩色信息的真实再现。不含荧光剂的承印 物有利于荧光油墨的色彩再现，纸张比pc 膜色调再现能力好。结论 最终制备的水性丝印荧光油墨具备 优良的荧光性能，可以再现sRGB 色域内的大部分色彩。 关键词：丝印荧光油墨；荧光强度；呈色方式 中图分类号：TS802.3 文献标识码：A 文章编号： 1001-3563(2017)23-0229-05 Color Reproduction of Water-based Fluorescent Screen Printing Ink WANG Li-li, ZHANG Wan, HUANG Bei-qing , WANG Hui, WEI Xian-fu, XIONG Xiao-tong , ZHANG Lu (Beijing Institute of Graphic Communication, Beijing 102600, China) ABSTRACT: The work aims to better study the imaging mechanism of the additive color method, improve the fluores- cence performance of the red fluorescent screen printing ink, and then study the coloration performance of the three-color fluorescent ink. The fluorescence performance of red water-based fluorescent screen printing ink was studied by changing the content of red fluorescent material. Based on that, the color gamut of red, green and blue fluorescent ink was obtained. The effects of different coloration methods on the fluorescence performance of three-color ink were compared and the ef- fects of two different substrates on the coloration performance of three-color ink were investigated. When the phosphor content was 6%, the fluorescence intensity of red water-based fluorescent screen printing ink was the best. The color ga- mut range of three-color fluorescent i