EAST偏滤器等离子体边界热流试验测量和模拟计算的建议.PDF

HT-7/ EAST ASIPP EAST 2007-1-9 (1)-PFC HT-7/ EAST ASIPP • Integrity of components – Security margin of 2 for primary stresses such as eddy and Halo current forces – Minimum safety margin of 1.5 for critical heat flux limit • Capability to remove heat load – High degree of confidence to the heat transfer and acceptable surface and bonding temperatures – Good fatigue limit under cyclic thermal loading • Reliable manufacturing and specific control – Stringent quality control applicable to series production and at each step of fabrication – Non-destructive testing (NDT) is part of the quality control 2007-1-9 EAST 1 (2)-EAST HT-7/ EAST ASIPP • 3PFMC SS/bolting/support w/o coolingC/bolting/Cu with active cooling/support3~5MW/m2 PFM, indirect cooling • PFMCC/Cu/support W/bonding/Cu with active cooling/support ~10MW/m2PFM, direct cooling • B2/Eirene (benchmarking) PFC • PSI 2007-1-9 EAST 2 HT-7/ EAST ASIPP • PFMC ( ) • PFMC ( )