贝加莱BR控制系统样本 x20 明扬工控商城专业销售.pdf

X20(c)CP1301, X20CP1381 and X20CP1382 X20(c)CP1301, X20CP1381 and X20CP1382 1 General information Compact CPUs are available with processor speeds of 200 MHz and 400 MHz. Depending on the variant, up to 256 MB RAM and up to 32 kB nonvolatile onboard RAM is available. A built-in flash drive is available to store up to 2 GB of application and other data. All CPUs come equipped with Ethernet, USB and one RS232 interface. In both performance classes, integrated POWERLINK and CAN bus interfaces are also available. If additional fieldbus connections are needed, the CPU can be upgraded with an interface module from the standard X20 product range. These CPUs do not require fans or batteries and are therefore maintenance-free. 30 different digital inputs and outputs and 2 analo inputs are integrated in the devices. 1 analo input can be used for PT1000 resistance temperature measurement. • CPU is Intel® x86 200/400 MHz compatible with integrated I/O processor • Ethernet, POWERLINK with poll-response chaining and USB onboard • 1 slot for modular interface expansion • 30 digital inputs/outputs and 2 analog inputs integrated in the device • 1/2 GB flash drive onboard • 128/256 MB DDR3 SDRAM • Fanless • No battery • Battery-backed real-time clock 2 Coated modules Coated modules are X20 modules with a protective coating for the electronics component. This coating protects X20c modules from condensation and corrosive gases. The modules electronics are fully compatible with the corresponding X20 modules. For simplification purposes, only images and module IDs of uncoated modules are used in this data sheet. The coating has been certified according to the following standards: • Condensation: BMW GS 95011-4, 2x 1 cycle • Corrosive gas: EN 60068-2-60, Method 4, exposure 21 days Data sheet V 1.14