螺旋输送机设计(论文)_精品.doc

摘要 随着现代科学技术的日益发展，螺旋输送机的应用也越来越广泛。物料从进料口加入，当转轴转动时，物料受到螺旋叶片法向推力的作用。该推力的径向分力和叶片对物料的摩擦力，有可能带着物料绕轴转动，但由于物料本身的重力和料槽对物料的摩擦力的缘故，才不与螺旋叶片一起旋转，而在叶片法向推力的轴向分力作用下，沿着料槽轴向移动。 本设计以建筑业为背景，对此工况下所要求的螺旋输送机结构进行设计与计算，对整个装置中的传动系统进行了运动力学分析及结构设计，对其驱动装置做了深入设计，并着重对其主要零部件进行了具体设计，包括螺旋输送机的螺旋直径，螺距，轴径进出料口，叶片形式，中间悬挂轴承，槽体，螺旋轴的计算选型。 电动机是通过螺旋输送机的功率来计算选型。减速器中齿轮通过齿面接触疲劳强度来计算，通过齿根弯曲疲劳强度验算；轴按许用弯曲应力计算法校核轴径。 关键词 电动机；减速器；螺旋叶片；螺旋轴 Abstract With the growing of modern science and technology development, application of the screw conveyor is more and more widely. When the material was added to the inlet orifice, and the shaft rotated, the materials was given the thrust by the helicallobe. The thrust of the radial contribute to the material and blade the friction, it is possible that the materials could rotate around the axis, but because of the gravity of the material and the friction which the silo acted, the material do not rotate with the helicallobe, it move along the axis of the silo by the thrust of the spiral blade . For the construction industry background, which is required by the screw conveyor design and structure in this design. The entire device in the transmission system for the movement of mechanical and structural was designed. The design of its driving system and the specific design of its main parts, which is including the screw conveyor spiral diameter, pitch, the shaft diameter of inlet orifice, the calculation and selection of the shafts, the middle hoist and the spiral axis were carried out. In detal, motor is through the power of the screw conveyor to calculate and select. The gears in the reducer is calculated by the gear surface contact fatigue strength and checked by the gear bottom bend fatigue strength, I check the diameter of axle through the permissible bending stress Keywords motor reducer helicallobe spiral axis 目　　　录 1 绪论 1 1.1 螺旋输送机产品概述 1 1.2 螺旋输送机应用范围 1 1.3 螺旋输送机主要特点 2 1.4 螺旋输送机工作原理 2 1.5 螺旋输送机整机布置形式 2 1. 6 螺旋输送机规格、技术参数 6 2.电动机的计算选型 9 2.1 电动机的选择 9 2.2 传动装置的运动和动力参数的计算 10 3.减速器