Lifting Plan 吊装方案.doc

16.2、Lifting plan吊装方案 Generals of Work工程概况 There are 248 sets of equipment with different weights. Lifting of large equipments concerned is mainly concentrated in Production Building B, Mixing Pots T-202, T-210 are the heaviest equipments, with monomer weight of 27 tons. 120T Truck Crane Model ATF 120-5 shall be employed. 100T, 50T, 25T cranes may be used according to different volumes and weights respectively and forklift and chain blocks plus roller bars will also be used to locate equipment in place. The manufacturer shall be responsible for transporting equipment to the site of Ecolab Taicang Jade Project. The authorized party shall be responsible for mobilization of vehicle and personnel and coordination and communication with the Owner at site. We will pay highly attention to construction and get organized elaborately, arranged thoughtfully, work done carefully to ensure the lifting of equipment in place without any risks. 本项目共有设备248台，设备重量不等，涉及的大型设备吊装主要集中在生产车间B，其中以混合釜T-202、T210为最重，单重为27吨。计划采用ATF 120-5型号的120吨汽车吊，其它设备根据体积和重量的不同分别采用100吨、50吨、25吨吊车或者采用叉车及配合用手拉葫芦加滚杠进行就位。由厂家负责运到艺康（太仓）科技有限公司新工厂项目工地，委托方负责组织车辆和人员的进场，负责现场协调和业主沟通。我们在施工时必须高度重视，要求做到精心组织、周密安排、谨慎施工，确保设备吊装就位万无一失。 The lifting work shall execute the following codes, specifications and requirements 本吊装工程执行以下规范、规程和要求： ① Code of Lifting Work for Engineering Architecture 工程建设起重施工规范； ② Specification of Safe Operation for Lifting Work 起重吊装安全操作规程； ③ Standard of Construction Technique for Large-sized Equipment Lifting Work 大型设备吊装工程施工工艺标准； ④ Performance List of Conveying flatbed trucks, cranes 运输平板车、吊车性能表； ⑤ Management System of Crane Safe Operation for Ecolab Taicang Jade Project. 艺康（太仓）科技有限公司新工厂项目有关吊车安全作业管理制度； ⑥ All concrete requirements for lifting work specified by the Owner and Jones Lang Lasalle. 业主和仲量联行对吊装工程的各项具体要求。 III、Heavy lifting parameters list大型设备吊装基 本参数一览表 No. 序号 Equipment Tag No. 设备位号 Equipment Description 设备名称 Weight 重量（t） Installation Elevation 安装标高(m) Crane Type 吊车选型 1 T-201 Mixing Pot 混合釜 10 0.3