TP学习资料.ppt

BYD Total Solution for Mobile Phone Display BYD Total Solution for Mobile Phone Display Resistive TP Main Product：Resistive Touch Panel Analog: 4Wires/8Wires Digital (Matrix) Product Types：Film to Glass Film to Film on Plastic Film to Film with Silicon Film to Film on Glass Touch Lens Product Size：1.6inch ?30inch ITO Film Dot Spacer ITO Glass or Film Lower Electrode Upper Electrode Pen or Finger Touch Panel Dimensions Touch Panel Film Surface Finish Touch Panel Glass Thickness Product Thickness Optical Character Table of Contents Resistive TP Design Guidelines- TP Dimensions TP AA: Single side is recommended to be larger than LCD display area by 0.5mm. TP VA: Single side larger than TP AA 1mm is better. Minimum distance is 0.5mm. TP CA: Single side is larger than TP VA 0.5mm. FPC Position: FPC bonding area needs larger area to design heat seal PAD, so please decide FPC in the most wide side. LCD Module LCD Display Area TP Active Area TP Viewing Area TP Cushion Area Film Type Characteristics Application Clear Haze: 0.5~1.5% High Clarity/ Transmittance Mobile Phone PDA Anti-Glare Haze: 4~7% Improve readability at high ambient lighting conditions. GPS (PND) Camera PDA Anti-Glare/ High Haze Haze: 14~20% Improve readability at high ambient lighting conditions. GPS (PND) Camera PDA Anti-Glare/ Anti-Newton Ring Haze: 3~7% Guarantee no Newton Ring occurrence. Middle-Large size Anti-Glare/ Anti-Fingerprint Haze: 6~10% Easy to clean greasiness on the film surface. Middle-Large size Design Guidelines- TP Glass Thickness J Touch provides several different levels of glass thickness Type Thickness Normal 0.4, 0.55, 0.7, 1.1, 1.8, 3.0 mm Tempered 0.55, 0.7, 1.1 mm Static Load Test Type Normal Tempered 0.4 0.55 0.7 1.1 0.55 0.7 1.1 Load (Kg) 3 4 5 10 12 12 12 Type F/F/Silicon F/F/PC F/G F/F/G Bottom Substrate Thickness Lower Film: 0.18 Silicon: