单点系泊油滑环密封系统APL Swivel Stack Traning Course精选.ppt

* * * * Swivel Control Cabinet This section contain the basic description of the MAC panel that is running on the operator panel which is mounted in front of the swivel control cabinet The HMI ( Human Machine Interface ) contains information about the HPU and swivel system Information on alarm list Barrier system pressure, ( primary and secondary ) Torque Trend Level in oil tanks * SCC front layout * Operator Panel E-300 * Operator Panel E-300 * Operator Panel E-300 Defined keys, all windows * Operator Panel E-300 * Operator Panel E-300 Pump Status * Operator Panel E-300 Sensor Status * Operator Panel E-300 Valve Status * Operator Panel E-300 Torque sensors * Maintenance This section will focus on required inspection / maintenance for the swivel stack system. Minimum requirements are given. The operator of the equipment may impose more stringent requirements. Maintenance activities are grouped according to the following schedules: Weekly 3-Monthly 12-Monthly In addition, vital parts exposed to fatigue wear shall be replaced according to instructions given later in this document. Visual inspection activities shall be performed every week the first month after first oil, then twice a month for the next two months followed by monthly inspection rest of the first year. After the first year, the procedures should be performed as outlined below. * Maintenance Before any maintenance is carried out the following precautions shall be taken. Comply with permit to work orders, all safety requirements, and work procedures. Check for other activities within your proposed area of working and satisfy yourself a conflict does not exist with other work. Ensure the maintenance area and the MCC is manned during the duration of the work. Establish a radio link between the maintenance area and the MCC. Do not work alone Referance is made to maintenance manual for Complete description of objects to be inspect and actions in case of failure * Weekly Check that all barrier oil