CP60技术资料6826.pdf

Transfer Installation Procedure Chapter 5. Transfer Installation Procedure Initial operation of this machine should be performed according to the following procedure. If the machine is installed or test run by an untrained person, the machine might be damaged and personal Warning injury could occur. The installation or test run of machine must be carried out by our authorized C/S personnel only. OOperational procedure 1. Unpack the packing box. If excessive force is exerted when the packaging is removed, it could damage the cover of the machine. Caution Do not exert excessive force during the removal of packaging. 2. Move the machine to the intended location for installation. In case of using lift truck(or lift cart), refer to lift arm size and usage direction. 5-1 Samsung Component Placer CP-60L Operations Manual Min 1600mm Max 1000mm Upper surface of Lift arms should be contacted to the plane Caution of the frame. If lift arm contact to the bottom of cover, it will be damaged.