MD380自动与MD350等手动切割器维护操作图示.ppt

Illustration InstructionMD380 Autocutter 自动切割器 JD Group Germany Replace the blade 换刀片 Replace the blade 换刀片 Replace the blade 换刀片 3. You can see the knife house after dismantling the front cover 卸下前盖板后见刀盒 Replace the blade 更换刀片 4. You may see the round knife after dismantling the cover. 卸下盖板后可见圆刀片。 Install the handle--1. 把手的安装--1。 Install the handle--2 把手的安装--2。 Place the sterilization reel. 放置封口袋。 4. Place the sterilization reel through the pressing rods as showed. 放置封口袋穿过压杆如图。 The autocutter is cutting the reel on your order. 自动切割机按设定切割封口袋。 LCD Key Board 液显屏键盘 MD580 Autocutter Workstation自动封口机工作站 Illustration InstructionMD350, MD360, MD360M, Three level Cutter手动切割器图示说明 JD Group Germany Manual cutters: MD350, MD360, MD360M,Three level Cutter.  手动切割器系列。 Manual Cutters: Insert the sterilization reel between the pressing rods. 手动切割器: 将封口袋插入压杆。 Pull out the reel between the upper and lower pressing rods. 将封口袋从压杆间拉出来。 Pull out the reel as long as you want, then move the knife house left and right to cut the reel。拉出卷料确定所需长度，向左右移动刀盒即可裁切。 Call your distributor for more informationThanks * * Medicare Co. Ltd. 深圳市美康达医疗保健有限公司 MD380 Autocutter 自动切割器 1. Set in a value, e.g. 26cm, at Width, then press Enter key to start, switch off when the knife house moves to the middle part of the machine. The knife house will stop there for your maintenance. 将宽度设一个数值，按“Enter”键启动。当刀头走至机器中部，切断电源，刀头即停靠接受维护。 2. Dismantle the front cover 卸下前盖板 前盖板 Front cover Round blade圆刀片 Knife house 刀盒 5. Dismantle the screws on the knife. 卸下刀片上的螺丝。 Replace the blade 换刀片 6. Dismantle the blade. 取下旧刀片。 Replace the blade 换刀片 7. Install a new blade and the cover. 安装新刀片和盖板。 Replace the blade 换刀片 Handle and window 把手和小窗 Turning arm 转臂 Insert the handle into the Turning Arm through the window, then turn tightly as A. Fix the handle with a screw as B. 于图“A”处将把手扭紧，于图“B”处用一颗螺丝固定住。 Press the handle downward to releas