Fortigate防火墙策略 49p.pptVIP

Unlike standard OSPF configuration, there is no specific statement such as default-information-originate to specifically redistribute the IPv6 default route ::0/0. The default route is considered as any other static routes and processed as such. get router info6 routing-table Protection Profile, typically defined in the group however with some authentication methods the profile can come from the server. Group type provides authorization information: Firewall: a firewall policy specifies the user groups that are allowed to use the policy, and has optional FortiGuard override settings SSL-VPN: controls access to the FortiGate SSL-VPN tunnel and SSL-VPN web applications Active Directory: controls access to firewall policies based on Windows AD group membership User names stored in the config file, passwords are either stored encrypted in the config file or retrieved from a RADIUS or LDAP server. 多对一的源地址转换是通过转换源端口来实现的。理论上上，最多一个公网地址可以支持64500个会话。 如果选择”保持端口号“，则无法实现多对一的地址映射。 The IP Pool function on a FortiGate is simply to control the source IP of traffic subject to a NAT.? Referring to the first point above, if you had an IP Pool that contained “192.133.168.[80-82]” traffic from the inside subject to that policy would have the source IP changed to the first IP address in the pool (0).? Round robin would be used to dictate the source IP of subsequent egress traffic assuming more than one IP address present in the pool.? The IP Pool option doesn’t apply to, and is unavailable unless the NAT checkbox is selected, and an IP Pool exists that is associated with the egress interface. This technology is useful when a host must masquerade as an IP other than its own for outgoing sessions. This particular technology is stateful, but is not however bi-directional. This technology will allow a larger amount of concurrent sessions to be subject to NAT in the firewall policy due to the additional IP and port associations created by PAT. * The diagram above illustrates that an o