CACT消防安全作业规范培训讲义.ppt

Fire Prevention Through Operations 生产作业中如何防火 Battery Room 电池房 UPS OXYGEN 电池释放的氢气 Battery Room 电池房 Oxygen is highly explosive, maintain well ventilation 氢气极易爆炸,确保电池房良好通风 Fire Prevention Through Operations 生产作业中如何防火 Oil Soaked Insulation 被油浸泡过的隔热层 Auto-ignition can occur if the pipe / vessel is over 200oC and the insulation is oil-soaked. Replace oil—soaked insulation, apply water when conduct this work. 温度超过200 oC的管线/容器会使沾了油的隔热层发生自燃. 应及时更换沾了油的隔热层. 更换时应洒水防火. Fire Prevention Through Operations 生产作业中如何防火 Heating Coils 加热丝 Submerged to Prevent Ignition 为防点火,加热丝不得露出液面 Fire Prevention Through Maintenance 维修作业中如何防火 Portable Tools 手动工具 Hot work permit required when use at hazardous areas 如在有防爆等级要求的区域使用须申请热工作业许可证 Fire Prevention Through Maintenance 维修作业中如何防火 Fuse 保险丝 DO NOT: Replace when circuit is live Oversize Fuses Shorting out a Fuse 不 要: 带电换保险丝 用大规格的保险丝 将烧坏的保险丝裁 短使用 Fire Prevention Through Maintenance 维修作业中如何防火 Repair to Fire Protection/Fire Fighting Equipment 消防设备的修理 - When repair alarm systems, alternative back up protection shall be provided. 在修理报警系统期间要派人监测. - Without the Supervisor’s approval, fire water system shall not be taken out of service.没有监督批准, 不得 停掉消防水系统. Fire Prevention Through Maintenance 维修作业中如何防火 Repair to Fire Protection / Fire Fighting Equipment 消防设备的修理 - Repair to fire water system shall be tracked daily and given the highest priority. 对消防水系统的修理应当做首要工作并每日 跟踪其进展. - Personnel (Fire Team) shall be notified when fire protection / fire fighting equipment is taken out of service / return service. 消防设备暂停使用/