基于enspv510版ac和ap配置-txj.docx

基于enspv510版ac与ap配置四川托普信息职业技术学院 唐小军拓扑图实验环境：相应设备：1.无线AP:5030, AC:6605,2.交换：二层，s3700，三层，s57003.电脑：STA实现目标：STA3能通过无线方式访问到三层交换机接口地址，10.23.101.2配置思路1.配置AP、AC和周边网络设备之间实现网络互通。2.配置AP上线。创建AP组，用于将需要进行相同配置的AP都加入到AP组，实现统一配置。配置AC的系统参数，包括国家码、AC与AP之间通信的源接口。配置AP上线的认证方式并离线导入AP，实现AP正常上线。3.配置WLAN业务参数，实现STA访问WLAN网络功能。实验过程：二层交换机配置HUAWEI system-view[HUAWEI] sysname Switch[Switch] vlan batch 100 101[Switch] interface Ethernet0/0/1[Switch-Ethernet0/0/1] port link-type trunk[Switch-Ethernet0/0/1] port trunk pvid vlan 100[Switch-Ethernet0/0/1] port trunk allow-pass vlan 100 101[Switch-Ethernet0/0/1] port-isolate enable[Switch-Ethernet0/0/1] quit[Switch] interface gigabitethernet 0/0/2[Switch-Ethernet0/0/2] port link-type trunk[Switch-Ethernet0/0/2] port trunk allow-pass vlan 100 101[Switch-Ethernet0/0/2] quit三层交换机配置Huawei system-view[Huawei] sysname Router[Router] vlan batch 101[Router] interface gigabitethernet 0/0/1[Router-GigabitEthernet0/0/1] port link-type trunk[Router-GigabitEthernet0/0/1] port trunk allow-pass vlan 101[Router-GigabitEthernet0/0/1] quit[Router] interface vlanif 101[Router-Vlanif101] ip address 10.23.101.2 24[Router-Vlanif101] quit配置AC与其它网络设备互通AC6605 system-view[AC6605] sysname AC[AC] vlan batch 100 101[AC] interface gigabitethernet 0/0/1[AC-GigabitEthernet0/0/1] port link-type trunk[AC-GigabitEthernet0/0/1] port trunk allow-pass vlan 100 101[AC-GigabitEthernet0/0/1] quit[AC] interface gigabitethernet 0/0/2[AC-GigabitEthernet0/0/2] port link-type trunk[AC-GigabitEthernet0/0/2] port trunk allow-pass vlan 101[AC-GigabitEthernet0/0/2] quit在AC上配置DHCP服务器为STA和AP分配IP地址[AC] dhcp enable[AC] interface vlanif 100[AC-Vlanif100] ip address 10.23.100.1 24[AC-Vlanif100] dhcp select interface[AC-Vlanif100] quit[AC] interface vlanif 101[AC-Vlanif101] ip address 10.23.101.1 24[AC-Vlanif101] dhcp select interface[AC-Vlanif101] quit在AC上配置AP上线# 创建AP组，用于将相同配置的AP都加入同一AP组中。[AC] wlan[AC-wlan-view] ap-group name ap-group1[AC-wlan-ap-group-ap-group1] quit# 创建域管理模板，在域管理模板下配置AC的国家码并在AP组下引用域管理模板。[AC-