管径计算及鹤管布置.doc

重庆科技学院 《油库设计与管理》 课程设计报告 设计地点（单位）___石油科技大楼 K802___________ 设计题目:_ 某油库设计——管径计算与鹤管布置_ 完成日期： 2014 年 12月 17日 指导教师评语: ______________________ ________________________________________________________________________________________________________________________________________________ 成绩（五级记分制）:______ __________  指导教师（签字）:________ ________ 摘要 油库设置管网的主要目的是完成油品的收发作业和输转倒罐等任务。各种油品的吸入管和排出管也是其中非常重要的一种管道，其管径的选择也是重中之重，本次设计的一个重要部分就是确定其管径的大小。 本设计为某中转-分配军用油库工艺设计。该油库经营油品包括1#航空汽油、2#航空汽油、70#航空煤油、95#航空煤油、130#航空煤油、93#车用汽油、97#车用汽油、0#轻柴油、-10#轻柴油；-20#轻柴油。全部油品均由铁路罐车散装运入，除部分油品从公路散装发出外，大部分油品仍由铁路散装发出。根据原始资料、数据进行基础设计。计算铁路货位的个数、专运线的长度，然后计算汽车装油鹤管数。然后进行布置。 关键词：油库 鹤管数 布置方式 管径 Abstract The main purpose of the depot set network is completed to send and receive operations and oil transferring inverted cans and other tasks. The suction pipe and the discharge pipe is one of the most important kind of various oil pipelines, the pipe diameter selection is also important, an important part of the design is to determine the diameter of the pipe size. For the design of a transit assignment process design of military oil depot. The oil depot operating including 1# 2# of aviation gasoline, aviation gasoline, aviation kerosene, 70# 95# aviation kerosene, 130# aviation kerosene, 93# gasoline, gasoline, light diesel oil, 97# vehicle 0# -10# -20# light diesel oil, light diesel oil. All oil by bulk of railway tank car transport into, except some oil emanating from the highway bulk, much of the oil is still issued by the railway bulk. Foundation design according to the original data, data. Calculation of railway freight transport specially a number, the length of the line, and then calculating the auto oil filling crane tube number. Then layout. Keywords: Oil Depot The crane pipe number Layout Diameter 目录 1 设计参数及基础数据 1 1.1管径计算的基本参数 1 1.2鹤管布置的基本参数 1 2 吸入管和排出管的管径的计算 2 2.1 经济流速的选取 2 2.2管径计算 3 2.2.1车用汽油的吸入管和排出管的管径的计算