模板技术交底记（ template technical disclosure notes）.docVIP

4模板技术交底记（4 template technical disclosure notes） Technical disclosure record Table B2 number B2-003 Project name Kai Sen Real Estate Development Company Kai Sen apartment time of disclosure in November 5, 2003 Abstract of explanation: Preparation of relevant materials, machines and tools for reinforcing bars in brick concrete structure. Quality requirement and construction technology. Disclosure content: (including in the project of key technical issues for the construction; ensure the construction quality of the construction methods, technical measures and relevant provisions; safety measures; quality standard and code for acceptance of construction drawings must be noticed in size, elevation, axis and embedded parts, reserved hole position; case; design changes in the quality and safety of operation requirement) First, construction preparation (1) operating conditions 1, play the wall 50 cm horizontal line, check whether the brick position meets the requirements for pre screening procedures. 2, structural column reinforcement binding, and run hidden inspection procedures. 3, check whether the structure column clean, including brick wall tongue ash, steel hanging mortar and column root floor ash. (two) material requirements Stereotypia combination steel template (length 600 cm, 750 cm, 900 cm, 1200 cm, 1500 cm, width 100 cm, 200 cm, 300 cm), yin and yang angle template should be smooth and clean. 50 x 100 wood pine wood, 2440 x 1200 12 thick bamboo plywood. 60 ~ 80mm nail. (three) main equipment Electric drill, spanners, pliers, hammer, planer, disc squat, etc.. Two, quality requirements 1, template installation works (1) main control items 1) when installing the upper formwork and its support of the cast-in-place structure, the lower floor should bear the bearing capacity of the upper load, or add the bracket; the column of the upper and lower bracket should be aligned, and the paving plate should be laid. 2) in brushing template isolation agent, no contamination o