土木工程毕业设计外文翻译CFD模拟和地铁站台优化通风.docVIP

CFD simulation and optimization of the ventilation for subway side-platform Feng-Dong Yuan *, Shi-Jun You Abstract To obtain the velocity and temperature field of subway station and the optimized ventilation mode of subway side-platform station, this paper takes the evaluation and optimization of the ventilation for subway side-platform station as main line, builds three dimensional models of original and optimization design of the existed and rebuilt station. And using the two-equation turbulence model as its physics model, the thesis makes computational fluid dynamics (CFD) simulation to subway side-platform station with the boundary conditions collected for simulation computation through field measurement. It is found that the two-equation turbulence model can be used to predict velocity field and temperature field at the station under some reasonable presumptions in the investigation and study. At last, an optimization ventilation mode of subway side-platform station was put forward. 1. Introduction Computational fluid dynamics (CFD) software is commonly used to simulate fluid flows, particularly in complex environments (Chow and Li, 1999; Zhang et al., 2006; Moureh and Flick, 2003). CFD is capable of simulating a wide variety of fluid problems (Gan and Riffat, 2004; Somarathne et al., 2005; Papakonstantinou et al., 2000; Karimipanah and Awbi, 2002). CFD models can be realistically modeled without investing in more costly experimental method (Betta et al., 2004; Allocca et al., 2003; Moureh and Flick, 2003). So CFD is now a popular design tool for engineers from different disciplines for pursuing an optimum design due to the high cost, complexity, and limited information obtained from experimental methods (Li and Chow, 2003; Vardy et al., 2003; Katolidoy and Jicha, 2003). Tunnel ventilation system design can be developed in depth from the predictions of various parameters, such as vehicle emission dispersion, visibility, air velocity, etc