毕业的设计年产40万件卫生洁具原料车间工艺的设计.doc

年产万件卫生原料车间工艺设计 摘 要 本次设计的主要内容为工艺部分的设计，包括工艺流程的选择，物料衡算，设备选型的论述，也对全厂总平面图，非工艺部分（土建、水电、运输、环境保护等）做了论述，并提供详细资料，本设计是可靠的。 工厂设计是完成工程技术人员的基本训练的设置的一个重要的环节，实践性强，使学生全面地运用所学，增加非专业知识，扩大视野，培养科学的工作方法，增强独立的分析思考能力，缩短理论与实践之间的差距。 关键词：工艺设计，原料车间，卫生 The Processing Technology Workshop Design of Annual Production Capacity of 400,000 Sanitary porcelain. ABSTRACT We design a polished tile factory, which output is 400,000 per year. The technical process is the core of the project, the calculation of the raw material and selection of the equipment were included in the direction. The design of the whole factory and the no technical part were also discussed. We choose the best of the technical process during the time of the design. In a word, the design is very realize. The factory design is a very important link for a technical worker to make a good basis for the future study and working. It can make us to comprehensive go over, use and improve our finishing study, train the ability of thinking, analyzing and salving problem, and reduce the distance of the theory and practice. This project is primary to the design of raw material and glaze workshop. These were processed with minute calculation of the raw material and the selection of the equipment. We also discuss for the disposal of the whole factory’s inchnography and offer the detailed information for the buiding.In this project; the arts and crafts of manufacture and the equipment are advanced and full-blown. Keywords: technical design, polished tile, sanitary porcelain. 目 录 摘要 I ABSTRACT II 前 言 1 1 总论 2 1.1 设计依据与原则 2 1.1.1 设计依据 2 1.1.2 设计原则 2 1.2 设计范围和深度 3 1.2.1 设计目的 3 1.2.2 扩大初步设计 3 1.2.3 非扩大初步设计 3 1.2.4 设计成果 3 1.2.5 工艺设计内容 3 1.3 建厂规模与产品方案 4 1.3.1 建厂规模 4 1.3.2 产品方案 4 1.3.3 方法与思路 4 1.4 工作制度 4 1.5 环保 6 1.6 坯料配方 6 1.7 劳动保护和职工安全卫生 6 1.7.1 劳动保护措施 6 1.7.2 其它 7 2工艺设计 8 2.1 工艺流程选择论证 8 2.1.1 选择原则和依据 8 2.1.2 坯料制备工艺流程选择 8 2.1.3 干湿法流程比较 8 2.1.4 成型方法的选择 9 2.1.5 物料分流与回流的设计 10 2.1.6 烧成方法的选择 10 .2.1.7最终工艺流程选