sniffer中文_使用说明.ppt

* * There is a Distributed Sniffer Pro icon to the right of the address book. It is the “Stop remote request”, icon which is active when capturing remotely. It is used to cancel that remote capture. * Token Ring Dashboard has tabs for LLC and MAC WAN/Synchronous adapters (LM2000 and HSSI) have tabs for Line Status, SDLC, U-Frame, LAPB, Frame Relay and HDLC. * The Token Ring Dashboard Detail view gives the following statistics: LLC Counts MAC Counts Packets Packet Bytes Line Err Congestion Err Dropped Size Packets Internal Err FCC Err Broadcasts Distribution Ring Purge Burst Err Freq Err Bytes Beacon AC Err Token Err Utilization Claim Tkn Abort Err Soft Err Errors NAUN Chg Lost Frame Err * * The width of the line indicates the amount of traffic on that pair. It’s a quick top talkers view. * Available samples reflect the active topology. Keep this running minimized to get long term statistics. * The Table View provides the following statistics: Server Address – The address of the Server taking part in this connection. Client Address – The address of the Client taking part in this connection. AvgRsp – The average time (in milliseconds) of all responses observed on this connection. MinRsp – The time (in milliseconds) of the fastest response observed on this connection. MaxRsp – The time (in milliseconds) of the slowest response observed on this connection. TotRsp – The total number of responses observed on this connection. 0-25, 26-50…801-5000 – The number of responses on this connection in each of seven different time windows. For example, the number of responses to requests on this connection that took between 0 and 25 milliseconds to be sent, the number of responses to requests on this connection that took between 26 and 50 milliseconds to be sent, and so on. Server Octets – The total number of bytes sent from the Server to the Client on this connection. Client Octets – The total number of bytes sent from the Client to the Serv