幕墙工程的设计合同.docVIP

幕墙工程设计合同Design Contract for Curtain Wall Project工程名称Name of Project： 工程地点Location of Project： 合同编号Contract No.： 委托人（甲方）Consignor(Party A)： 承接人（乙方）Consignee(Party B)： 设计证书等级Level of Design Certification： 签订地点Place of Signing： 签订日期Date of Signing： 甲方委托乙方承担 设计工作，经双方协商一致，签订本合同。Party B is entrusted by Party A to design_______. Both the two parties herewith agree to sign the contract based on the principle of common consensus.本合同签订依据Article One Basis for conclusion of this Contract1．1《中华人民共和国合同法》、《建筑工程勘察设计管理条例》。“The Contract Law of the People’s Republic of China”; “Management Regulations of Investigation and Design in Construction Engineering”.1．2国家及上海市有关建设工程勘察设计管理法规和规章。National and local rules and regulations on Management Regulations of Investigation and Design in Construction Engineering.设计依据Article Two Design Basis 2．1甲方发给乙方的设计委托书或中标函。Letter of design assignment or Letter of acceptance provided by the Party A to the Party B.2．2甲方向乙方提交的有关资料和文件。Related information and documents submitted by the Party A.2.3乙方采用的主要技术标准：Main technical standards adopted by the Party B can be showed as follows:幕墙技术要求应符合国家标准GB/T 21086-2007《建筑幕墙》、JGJ102—2003《玻璃幕墙工程技术规范》和JGJ133—2001《金属与石材幕墙工程技术规范》、《企业标准》的相关要求。 The technical requirements of curtain wall should conform to relevant requirements in National Standard GB / T 21086-2007 Building Curtain Wall, JGJ102-2003 “Technical Code for Glass Curtain Wall Engineering as well as JGJ133-2001 Technical Code for Metal and Stone Curtain Walls Engineering and Enterprise Standard.合同文件的优先次序构成本合同的文件可视为是能互相说明的，如果合同文件存在歧义或不一致，则根据如下优先次序来判断：Article Three The documents forming the Contract are to be regarded as mutually explanatory of one another, but in case of ambiguities or discrepancies, the priority of the documents shall be listed as follows: